Thank you for the replies. He was able to find a used steering pump in decent shape - but now has engine failure. He's considering putting a 219 engine in so then I guess he would have to go without steering pump.
He got himself a little money pit - I'm glad I live far away.
Search found 37 matches
- Fri Apr 21, 2017 5:08 am
- Forum: Late model JD crawler technical support
- Topic: Straight 450 Dozer Steering Pump
- Replies: 3
- Views: 4555
- Sat Feb 25, 2017 4:50 pm
- Forum: Late model JD crawler technical support
- Topic: Straight 450 Dozer Steering Pump
- Replies: 3
- Views: 4555
Straight 450 Dozer Steering Pump
A friend has a straight 450 with a failed power steering assist pump. It appears there is no way to rebuild the pump and new is $1,700+. (Love John Deere!) My understanding is that it is an "assist" system. Does anyone know if it is possible to just remove and seal off and operate without the pump? ...
- Mon Jul 23, 2012 11:34 am
- Forum: Late model JD crawler technical support
- Topic: Need a used sprocket for a 450c
- Replies: 1
- Views: 2608
Need a used sprocket for a 450c
I'm in the middle of a project.
Rest of the undercarriage doesn't warrant a new sprocket.
Just want to get this one done and then maybe do a complete undercarriage overhaul.
Does anyone know where I might obtain a sprocket.
I'm in central Ohio.
Thanks.
Bill
Rest of the undercarriage doesn't warrant a new sprocket.
Just want to get this one done and then maybe do a complete undercarriage overhaul.
Does anyone know where I might obtain a sprocket.
I'm in central Ohio.
Thanks.
Bill
- Wed Jul 20, 2011 2:59 pm
- Forum: Late model JD crawler technical support
- Topic: Steering Clutch Question
- Replies: 0
- Views: 2437
Steering Clutch Question
I was looking at a 450C Loader today. It's a little rough but might serve my purpose. However, I noticed that when you pull the left steering lever and let go, the left track returns to speed immediately. However, when doing the same with the right side, there is a noticeable lag - like 2 or maybe e...
- Mon Jul 11, 2011 6:40 am
- Forum: Late model JD crawler technical support
- Topic: 450C Final Drives / 80w-90 Gear Oil or Hygard Hydraulic?
- Replies: 6
- Views: 11151
Thanks for the responses. I've been looking at the parts book and I don't believe the final shares oil with anything else. The trans and steering clutches share the same sump but that is it. If anything, it looks like a leak would let oil from the steering clutches migrate to the finals as they are ...
- Fri Jul 08, 2011 9:26 am
- Forum: Late model JD crawler technical support
- Topic: 450C Final Drives / 80w-90 Gear Oil or Hygard Hydraulic?
- Replies: 6
- Views: 11151
No offense meant but, I understand what is specified. I also know that there are compromises made in specifications - for example the benefit of just going with one lubricant for entire machine (no need for user to stock multiple products) when another might be slightly better in a given location. N...
- Thu Jul 07, 2011 10:25 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Final Drives / 80w-90 Gear Oil or Hygard Hydraulic?
- Replies: 6
- Views: 11151
450C Final Drives / 80w-90 Gear Oil or Hygard Hydraulic?
I just changed out my fluids and filters. The book calls for hydraulic fluid in the finals but what came out was heavier than hydraulic, so I put in 80w-90 gear oil. I talked with an experienced mechanic who said they always used to run the gear oil because the hydraulic just doesn't seem heavy enou...
- Thu Jul 07, 2011 7:18 am
- Forum: Late model JD crawler technical support
- Topic: 450C Battery Box
- Replies: 4
- Views: 5095
- Tue Jun 21, 2011 3:15 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Battery Box
- Replies: 4
- Views: 5095
450C Battery Box
Does anyone know where I might find one?
I found a used one but it is too small. I guess it is for a 350.
I found a used one but it is too small. I guess it is for a 350.
- Sun Jun 12, 2011 7:50 am
- Forum: Late model JD crawler technical support
- Topic: 450C Pivot Pin Bushing
- Replies: 9
- Views: 8408
Few More Pictures
http://i1212.photobucket.com/albums/cc459/Farmboy1969/DSC01233.jpg http://i1212.photobucket.com/albums/cc459/Farmboy1969/DSC01239.jpg http://i1212.photobucket.com/albums/cc459/Farmboy1969/DSC01235.jpg http://i1212.photobucket.com/albums/cc459/Farmboy1969/DSC01245.jpg http://i1212.photobucket.com/al...
- Sun Jun 12, 2011 6:47 am
- Forum: Late model JD crawler technical support
- Topic: 450C Spool Valve 6 Way
- Replies: 15
- Views: 18329
Agreed on the tech manual error. I'm lucky that our company has a very good mechanic that kind of oversees what I'm doing and gives me tips, etc. as I go. He convinced me it had to be wrong or I would have probably put it back together per the book and had to take it all back out again. LP, not sure...
- Sun May 22, 2011 9:02 am
- Forum: Late model JD crawler technical support
- Topic: 450C Pivot Pin Bushing
- Replies: 9
- Views: 8408
- Fri May 20, 2011 2:08 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Spool Valve 6 Way
- Replies: 15
- Views: 18329
Schematic is WRONG
Just for what it's worth to anyone who might go through this process, the JD schematic for this Spool Valve is WRONG! http://i1212.photobucket.com/albums/cc459/Farmboy1969/SpoolValveSchematic.jpg Part number 22 (Plunger) is shown backward. There is no way it will go together as shown. Also the 5/16"...
- Fri May 20, 2011 9:44 am
- Forum: Late model JD crawler technical support
- Topic: 450C Pivot Pin Bushing
- Replies: 9
- Views: 8408
- Fri May 20, 2011 7:53 am
- Forum: Late model JD crawler technical support
- Topic: 450C Pivot Pin Bushing
- Replies: 9
- Views: 8408
I had a huge amount of blade slop. You can see how the top of the pivot pin was badly worn. Interestingly, the hole in the back of the blade wasn't worn nearly as much. (Must be harder metal) We noticed that the hole was about 2.7" and the pin was about 2.5". 2.5" Schedule 40 steel pipe has an ID of...