How much is the track adjuster? I couldnt find it on the parts page. How much is shipping to zip code 41166.
Buck
Search found 12 matches
- Mon Nov 03, 2008 5:41 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Track adjuster help
- Replies: 3
- Views: 3874
- Sun Nov 02, 2008 4:28 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Track adjuster help
- Replies: 3
- Views: 3874
1010 Track adjuster help
I have busted the housing that holds the grease.Where can I get another adjuster? Manual or hydraulic either should work right? will another model fit if I should find one?
Buck
Buck
- Fri Nov 23, 2007 5:24 pm
- Forum: Early model JD crawler technical support
- Topic: Manual adjuster
- Replies: 3
- Views: 4077
1010 track adjusters
if you have a good used hydraulic one that would be great. If not,how much would the new ones be? hydralic or manual?
gary
gary
- Thu Nov 22, 2007 6:49 pm
- Forum: Early model JD crawler technical support
- Topic: Manual adjuster
- Replies: 3
- Views: 4077
Manual adjuster
How does the manual adjuster work? how does the grease adjuster come out? lavoy,do you have any of these? how much are they. a portion of the head of ours chip off and losses grease and wont hold tension on the track. is there any other ideas how to fix this.thanks for the info. gary
- Sun Oct 28, 2007 8:00 am
- Forum: Early model JD crawler technical support
- Topic: steering clutch education
- Replies: 1
- Views: 3188
steering clutch education
:D after a few tear downs and the advice of the experts on the board,i have finally made my father happy. the old 1010 is ow steering VERY WELL. the gauge used to set them with is a pretty important piece.take my word for it.i made my own from an educated guess as to what the setting was from the bo...
- Thu Oct 25, 2007 5:38 pm
- Forum: Early model JD crawler technical support
- Topic: Pressure plates again
- Replies: 1
- Views: 2825
Pressure plates again
we tore the finals down again to replace the "new" pressure plates.the one that was in it you could squeeze with your fingers.the new one your lucky to depressed it with your foot.---anyway--i put it back together it turns but not real good.i didnt have the gauge to set it with(i know bad me) is the...
- Tue Oct 09, 2007 3:24 am
- Forum: Early model JD crawler technical support
- Topic: HEY LAVOY!!!
- Replies: 3
- Views: 4136
pressure plates
I didnt have the the guage but, should you be able to compress the fingers between you thumb and forfinger? i had the adjustment most of the way out and could see the cluthes turning when i looked into the housing.i feel there isnt enough pressure on the disks. gary
- Mon Oct 08, 2007 5:36 pm
- Forum: Early model JD crawler technical support
- Topic: HEY LAVOY!!!
- Replies: 3
- Views: 4136
HEY LAVOY!!!
Do you have any pressure plates in stock.what are the prices? new,rebuilt,or used? i have an exchange,it only has 1 spring under the fingers. the book shows 2. i think they sold us the wrong one when we got these two. the other seems ok.(it;s the only one that pulls like it should. how much is shipp...
- Sat Oct 06, 2007 4:30 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 pressure plates
- Replies: 2
- Views: 3518
1010 pressure plates
I took the finals apart today.The pressure plate only has on spring in the finger of the clutch.the book shows 2 a pressure spring and a auxillary spring.this was the side that wasnt steering well.the only thing that i find funny,my dad pulled out an old 310b case backhoe out of some weeds and a sem...
- Sun Sep 23, 2007 10:13 am
- Forum: Early model JD crawler technical support
- Topic: 1010 steering clutches slipping
- Replies: 4
- Views: 4966
steering clutches
there is a little play not sure how much.we have done the adjustment,where you dis-connect the are and push the throw out bearing against the fingers of the pressure plate then adjust the arm to the right length.we thought maybe the brake band was catching to early,but we backed it off and it done t...
- Sun Sep 23, 2007 4:59 am
- Forum: Early model JD crawler technical support
- Topic: 1010 steering clutches slipping
- Replies: 4
- Views: 4966
steering clutches
I had messed up on the previous post. when you pull the right stick back the dozer stops moving when it should be turning.it will turn for a few turns then when you try to turn it will stop turning. the longer you run it the worse it gets.it will continue to move forward but no steering.sorry about ...
- Sat Sep 22, 2007 7:41 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 steering clutches slipping
- Replies: 4
- Views: 4966
1010 steering clutches slipping
I have a 1010 that doesnt steer to weel when turning left.it does ok for a couple of turns then it quits. we have put new pressure plates in and the disks seem to be ok. i was going to tear it back down and just thought i would ask the experts there opinion on what to look for and where to start.the...