JDcrawlers Messageboard

No, the seal between transmission and steering clutch housing.
Does the housing need to be removed or just the clutch pack?

Thanks Lavoy, If I have to do the transmission side, do you know if the clutch housing has to be removed to get to the seal?

Interested in speaking with someone who has replaced oil seals between transmission and clutch housing and clutch housing and final drive. Thanks.

I suspect one of the brass pushrod tubes is leaking around it's seal with the head. Water could be coming from block side and leaking by the head gasket, but I don't think so. Should I try to re expand the tube against its seat in the head (it is a tube that has been in the head a long time) or repl...

Thanks, if I can't adjust w/Lavoy's instruction may have to disassemble sleeve and examine.

Referring to when the brass shifting fork over centers on the shifting collar? Thanks for your help on this.

Thanks, will give that a try. What mechanism actually makes it snap?

Need advice on getting BO Lindeman clutch to "snap" engaged. Have read service manual and watched videos but no luck. Would appreciate some help.

Am looking for rear drawbar assembly and fenders (TE 474 and TE 475) for BO Lindeman and any contact info for someone who may be parting out a Lindeman crawler. Thanks. Judd

I'm working on a BO Lindeman restoration and noticed some clicking in one of the final drives when I turned the sprocket after removing the track. Being curious and not wanting just to paint without repairs, I've disassembled the final drive. The pinion gear has some obvious wear, some pits and chip...