Search found 301 matches
- Thu Nov 09, 2017 5:36 pm
- Forum: Late model JD crawler technical support
- Topic: Back hoe attachment
- Replies: 11
- Views: 8254
Re: Back hoe attachment
many years ago my dad had a 350 loader with a hoe and he dug many a foundation with the machine, it was totally rear heavy and put a ton of pressure on the final drives of the machine. he would dig the hole, foundation would be poured and he would remove the hoe to backfill and grade. later on he go...
- Tue Oct 17, 2017 6:12 pm
- Forum: Late model JD crawler technical support
- Topic: 450b fan
- Replies: 15
- Views: 13329
Re: 450b fan
I like all the stone walls on my dad's farm....the size of some of the rocks make me wonder how the heck they moved them to form the walls.
I remember being a young kid and asking who built the stone walls and all my dad said was some "very determined people"
I remember being a young kid and asking who built the stone walls and all my dad said was some "very determined people"
- Wed Oct 11, 2017 6:01 pm
- Forum: Late model JD crawler technical support
- Topic: 450C dozer track group
- Replies: 4
- Views: 4220
Re: 450C dozer track group
should be able to get your tensioners out by releasing the grease check ball and collapsing the tensioner in as far as it will go, then use a come along or similar to pull the idler assembly forward as far as it will go, then remover the bolts on the front yoke of the tensioner and pull it out. shou...
- Thu Aug 24, 2017 5:20 pm
- Forum: Late model JD crawler technical support
- Topic: Track adjustment on 450D
- Replies: 10
- Views: 9099
Re: Track adjustment on 450D
yes as posted above hold idler forward somehow and cut old adjuster tube to remove, a fully compressed new adjuster should be able to be fitted in without splitting track
- Thu Aug 24, 2017 5:08 pm
- Forum: Early model JD crawler technical support
- Topic: Hyd track adjustment
- Replies: 7
- Views: 6354
Re: Hyd track adjustment
you need a low pressure grease gun, I use corn head grease for both my bottom rollers and the track adjuster. you most likely still have the button head grease fittings for your adjuster and rollers, they look like little mushrooms....you can get the special fitting to screw onto a low pressure gun ...
- Mon Jul 31, 2017 7:39 pm
- Forum: Early model JD crawler technical support
- Topic: Adapting a 1010 with 810 loader to quik tach
- Replies: 4
- Views: 4366
Re: Adapting a 1010 with 810 loader to quik tach
you could get some material and weld up and mount a quick plate, I agree with Lavoy....something like a root rake would most likely get cranked out of shape pretty quick.
I see what your thinking though, there are tons of different attachments for those quick mount plates out there.
I see what your thinking though, there are tons of different attachments for those quick mount plates out there.
- Fri Apr 21, 2017 7:07 pm
- Forum: Late model JD crawler technical support
- Topic: Engine
- Replies: 9
- Views: 8314
- Thu Apr 20, 2017 3:29 pm
- Forum: Late model JD crawler technical support
- Topic: Engine
- Replies: 9
- Views: 8314
yeah check pressure with a known gauge, don't trust dash for accurate reading also do a compression test to see what you have as well. she might not be that bad, she might be ready for overhaul. if you find low pressure or low compression at that point I would pull the oil pan to see how the crank j...
- Thu Apr 20, 2017 3:15 pm
- Forum: Late model JD crawler technical support
- Topic: Out of the shop
- Replies: 6
- Views: 6164
- Thu Apr 20, 2017 3:13 pm
- Forum: Late model JD crawler technical support
- Topic: 350C engine
- Replies: 4
- Views: 4465
are you jammed in both forward and reverse rotation? as already said sounds like when you shut it off and the engine slowed down the isolator came apart and jammed her up tight. sometimes they make a loud bang and come apart, I find most times as the engine comes to a stop after you shut it off it f...
- Mon Mar 20, 2017 5:04 pm
- Forum: Early model JD crawler technical support
- Topic: parasitic draw on a 420 positive ground generator system
- Replies: 9
- Views: 7019
- Wed Mar 01, 2017 6:52 pm
- Forum: Early model JD crawler technical support
- Topic: JD 2010 Crawler Steering Clutch
- Replies: 2
- Views: 3201
- Thu Feb 09, 2017 10:26 pm
- Forum: Early model JD crawler technical support
- Topic: 440- Rock guards- Install or not?
- Replies: 15
- Views: 14653
- Wed Jan 04, 2017 4:45 pm
- Forum: Late model JD crawler technical support
- Topic: 350b radiator
- Replies: 2
- Views: 3406
- Wed Jan 04, 2017 4:42 pm
- Forum: Early model JD crawler technical support
- Topic: 440icd cold weather starting
- Replies: 22
- Views: 14828