Search found 7 matches
- Thu Dec 27, 2007 5:51 pm
- Forum: Show & Tell
- Topic: snow pics
- Replies: 13
- Views: 14686
- Mon Dec 24, 2007 10:09 pm
- Forum: Off-topic discussions
- Topic: Merry Christmas
- Replies: 1
- Views: 3448
Merry Christmas
Twas the night before christmas,along time ago They came from Duduque as everyone knows, They were green on the top andyellow below,no one would believe how far they would go, They went north,south,east and west, and they knew they would do their very best, They were used and abused and beaten to de...
- Sat Dec 22, 2007 5:52 pm
- Forum: Early model JD crawler technical support
- Topic: 40 C steering clutch pack R&R.
- Replies: 17
- Views: 14548
sterring clutches
HI ohmgman; I'm not the expert there are some post on here for the same thing you are asking. Most say clean the steel disc and replace the fiber. You have it apart that way you won't have to do it again.Bearing in pic looks rusty wouldn't hurt to change too. clean it up and make sure the rest is ok...
- Sat Nov 10, 2007 6:59 pm
- Forum: Off-topic discussions
- Topic: moving a machine.
- Replies: 17
- Views: 19370
moving a machine
Hi Brett I had a problem moving my 430c, not in to a building off the trailer and 200 ft. The slickest thing is two pieces of the plastic mowboard that is used on the snowplows that the highway depts use.Slides nice on grass,frozen ground and wont hurt concrete might leave an orange stain. It worked...
- Sat Nov 10, 2007 6:47 pm
- Forum: Early model JD crawler technical support
- Topic: bottom part of muffler gets cherry red
- Replies: 6
- Views: 6533
red muffler
hi Joe If it was 180 out it wouldn't run. Could be water in the gas,or running rich. Depends how hard you were running at the time too.Maybe cleaning the plugs might help.Points could need gapping too. There are a lot of variables. Mailtrain
- Mon Oct 29, 2007 5:44 pm
- Forum: Show & Tell
- Topic: Newest project
- Replies: 13
- Views: 14325
- Thu Oct 25, 2007 5:23 pm
- Forum: Late model JD crawler technical support
- Topic: hydraulic questions 350 dozer
- Replies: 4
- Views: 6122
hyd hoses and pump leaks
Hugo it does make a difference on the hoses. You want it hooked so when the lever is pushed forward the blade goes down,if it has a float position it won't work.If reversed when you pull the lever to the up position it will drop fast. If pump is leaking externally it is a gasket or o-ring problem,if...