JDcrawlers Messageboard

Thanks , Looks like 2 16s will be all I need to pull in our Tennessee clay.

Does anyone pull a breaking plow with their crawler? And how big is it?

thanks

I haven't had my crawler very long and I see a reference to clutch gage on a few posts. And I am wonder what is a cutch gage and why use it?
Coonhunter

I have a 420c that I am repairing and am wondering about the spring tension on the governor. There is at least a 1/4 inch of movement before the spring starts to have any tension on the governor and throttle arms when I go from idle. The spring seems long and weak causing the governor not to work qu...

There are cast iron rods that are used in stick welding cast iron. Go to your local welding supplyhouse and ask them what they recommend for your application.I own a machine shop and have had an occasion to weld different materials and our welding supplier has always been helpful. Cast iron rods are...

What do you use to free up rusted bolts and screws?
Any suggestions? I have an adjustable fan belt pulley stuck and do not want to force it.

Has anyone had drive shaft problems and how did you repair the splines?
coonhunter

Hi I looking for a drive shaft and a coupling for a late 420c. The coupling
has an i.d. of 1 1/8 with 17 splines. Does anyone know of a source.
Coonhunter

Thanks for the reply. looks like a winter project
coonhunter

Hi, I just bought a 420 crawler without a reverser and have discovered a oil leak around the brake shaft going thru the reverser housing. The leak showed up after I drove the crawler on a steep bank.I have a manual and am in the process of getting a parts catalog. My first question, Should there be ...