JDcrawlers Messageboard

lavoy, I purchased the little gear and clutch plates from you and recieved them I thank you very much. After removing and cleaning the big gear,the inner tappered splines are worn really bad. I was wondering if you had this gear. The numbers on gear read as follows T14588T* T17491T It has 56 teeth t...

hello again, I got my crawler jacked up thought I'd start engine and see if I could rotate master link in track. I was able to move track. Is it possible that splines aren't torn out and there slipping I've made sure clutch is adjusted right. If so is there anything I can do without tearing it all a...

hello again, I got my crawler at an auction came with operators manual and service manual. oil or fuel got on section 150 final drives steering,and brakes. I was wondering if I could purchase just sections of the manual and if local dealer has them. thank you brian in ohio

are the composite plates hard to come by if i need them for the steering clutch

I have operators manual and have adjusted steering brakes and adjusted throw out bearing so it just touches clutch fingers. right side works fine but left I have nothing no brake or motion. I can see throw out bearing moving fingers. I was wondering if clutch is slipping