Search found 4 matches
- Fri Mar 14, 2008 10:50 am
- Forum: Late model JD crawler technical support
- Topic: jd 350b
- Replies: 3
- Views: 3657
Just got this 350b Thought I would run a pressure check just to be on the safe side. Wouldn't move when I got it, backed out the screw and it started moving. Have a service manual and was going to do the pressure test in the order it specifies just to be sure. If the clutch pressure is low will that...
- Thu Mar 13, 2008 5:59 pm
- Forum: Late model JD crawler technical support
- Topic: jd 350b
- Replies: 3
- Views: 3657
jd 350b
I am working on the reverser on a 350b, getting ready to run a pressure check. If the pressure readings are low do I need to add shims to increase pressure. Dealer says shims come in 25 and 60 thousands Does adding 1 shim change the pressure reading that much?
- Mon Jan 21, 2008 7:56 pm
- Forum: Late model JD crawler technical support
- Topic: 350b acumulator valve
- Replies: 2
- Views: 4522
350b acumulator valve
Need know if I can remove the acumulator valve from my 350BE without removing reverser. I think I am having an acumulator piston or a clutch valve problem. And if one of these is not operating properly or sticking can I get an accurate pressure reading?
- Mon Jan 21, 2008 3:32 pm
- Forum: Late model JD crawler technical support
- Topic: Reverser housing numbers?
- Replies: 1
- Views: 3239
You may have gotten an answer to what the "E" stands for on your jd350BE by now and I thought I would tell you what my dealer told me after I stumped him with the same question. It took him an hour...... "E" desinates that it has a diesel motor,inside 6 way blade and a reverser. I have the same thin...