JDcrawlers Messageboard

Lavoy ,thanks for the reply ,i will check the amp meter in the morning ,maybe the wires broke long time ago, Jeff

Lavoy ,my 40c crawler ,have to jumper wire coil to operate tractor ,tested wireing ,cannot get power to ignition switch, is power supplied from regulator to switch? , regulator has power from battery for generator ,charging system works perfect,tractor has no electric features except basic generator...

This is not a question on crawlers but a spreader towed behind ,it is a david bradley [sold through sears?] with a broken chain for the cross bar for the floor system that feeds the spreader,is this behond obsolete or is there help for it?The whole working farm is 50s and 60s eqipment.his thought is...

Put me down for a 40c crawler .blade on front with cylinder to pivot blade toan angle

Put me down for a 40c crawler .blade on front with cylinder to pivot blade toan angle

Just looking for a basic picture of ignition switch wireing ,switch has 2 or 3 positions besides off have power to switch but no power through switch ,replaced switch still no power have original 1950s switch and current replacement but the engine only runs when i hotwire coil ,system is basic gen, ...

I am a new member and just aquired a 40c crawler ,sat for 12 years+ ran bad when it did run, I found the motor frose solid in the cylinders,did a rebuild for the piston condition, but what suprised the old owner was the govener bushings shot and the throttle plate missing one screw and the other loo...