Hi,
I see a potential problem here.....
What do you use to unstick the D8 should it get stuck, too????
lol lol lol
I like to use a series of crawlers, by size, so that one has hope of unsticking one with another!
lol lol lol
Stan
Search found 2850 matches
- Wed Dec 03, 2008 1:57 pm
- Forum: Show & Tell
- Topic: Redneck Day at the mud hole
- Replies: 12
- Views: 15326
- Tue Dec 02, 2008 7:41 am
- Forum: Off-topic discussions
- Topic: I hate skid steer loaders
- Replies: 37
- Views: 38646
Finally back together
Hi, Well, the poor thing is *finally* back together. In the end, it wasn't so bad. Just rebuild the engine is all. We did have to up and replace that #2 con rod. It was just too chewed from running without a bearing to save, although we did try. Parts for these little engines cost more than parts fo...
- Wed Sep 24, 2008 2:01 pm
- Forum: Off-topic discussions
- Topic: I hate skid steer loaders
- Replies: 37
- Views: 38646
Update Time!
Hi, Well, the crank is fixed. So is the #2 rod. The #2 cylinder is ovaled out some 18 thou, so the machinist is simply going to bore and sleeve all three so that the original pistons can be reused. That option was $200 cheaper than boring alone with oversized pistons, so that's what'll happen. Shoul...
- Wed Sep 24, 2008 1:47 pm
- Forum: Early model JD crawler technical support
- Topic: exhaust pipe vs manifold
- Replies: 5
- Views: 5712
Hi, I presume you're talking 420 style here. Mine was just a short piece of steel exhaust pipe with a flange welded on in the middle. When it rusted off just under the flange - even with the top of the cast iron manifold - I used a chisel and removed the remaining piece of pipe that was stuck down i...
- Wed Sep 17, 2008 1:58 pm
- Forum: Show & Tell
- Topic: Adventures in rebuilding the 1956 420-C .
- Replies: 60
- Views: 74069
Hi, What? Can't weld with chimpunk tails?? :lol: I have ten cats on our farm. Well, make that twelve cats now. We had nine until our oldest daughter had us cat-sit hers - open ended timeframe, of course - and it turns out she didn't get her fixed. Now we have twelve as of four weeks ago! :P We have ...
- Mon Sep 15, 2008 12:09 pm
- Forum: Early model JD crawler technical support
- Topic: some 1010 info
- Replies: 3
- Views: 3714
Hi, Quite often, a really tightened track is an attempted quick fix for a really worn out undercarriage. These rails look to be well past fully worn from what I can see in the photos. What I can't see is the condition of the rollers. With the rock guards on, it's nearly impossible to see the rollers...
- Fri Sep 12, 2008 11:35 am
- Forum: Late model JD crawler technical support
- Topic: NTM JD 350B
- Replies: 19
- Views: 17453
Hi, I have had only one JD350, but it was a very decent machine for what I needed it to do - personal projects around the place. Mine was a 1966 and did not have a reverser, so I didn't have the loose reverser problem. :P The lack of a reverser didn't bother me much as 2nd and R are the same ratio (...
- Wed Sep 10, 2008 1:01 pm
- Forum: Late model JD crawler technical support
- Topic: Buying a 350? Some things to look out for . . . many photos
- Replies: 28
- Views: 33877
Hi, Thanks for the lovely photos! They'll be a big help for lots of folks, I'm sure. I've looked at a dozen 350's down here in NC in the past year, and they've all had several of these same issues. That explains why I haven't bought one yet. However, I know that there's a nice one out there. All I h...
- Wed Aug 27, 2008 12:20 pm
- Forum: Late model JD crawler technical support
- Topic: Snow Tracks JD350
- Replies: 11
- Views: 20552
Hi, Sounds to me like he's describing the high section of the snow pad grousers. They alternate like his description.... I have the snow pads on my 420c and they work great in snow and mud, but not so great on ice. To correct this, ice caulks were added to each pad. These are conical headed bolts th...
- Mon Aug 25, 2008 8:53 am
- Forum: Off-topic discussions
- Topic: I hate skid steer loaders
- Replies: 37
- Views: 38646
Hi, Well, nothing wierd, anyway. The engine is out and apart. Number 1 rod bearing was worn to the point that it was about to spin, but it *was* still there - unlike number 2! Someone forgot to check the oil one day, I suppose, and killed the poor little thing. Such a shame, really. The crank is che...
- Mon Aug 25, 2008 8:40 am
- Forum: Early model JD crawler technical support
- Topic: eBay 440
- Replies: 8
- Views: 6894
Hi, Ah, yes. You are the proud owner of a 'Project'! You're cutting your tractor restoration teeth on a crawler/loader? Hoo Boy! I will say that tractors aren't like cars, and crawlers aren't like tractors, and crawler/loaders are even *more* fun, fun fun! ;) Keep in mind, that everything on that ol...
- Mon Aug 25, 2008 8:34 am
- Forum: Early model JD crawler technical support
- Topic: B crawler?
- Replies: 14
- Views: 10222
Hi, Yes, that must be a BO Lindemann. They are fairly rare, but there's still quite a few here and there. I always wanted one myself. :) My uncle had a GPO Lindemann. It sat next to one of the few remaining Model C wheel tractors in the showroom area of our Pine Plains, NY JD dealership back in the ...
- Wed Aug 20, 2008 8:51 am
- Forum: Show & Tell
- Topic: New Member
- Replies: 1
- Views: 3203
Hi, I think the starting point would be a 420c 5-roller with a 62 blade. The 430 is pretty much the exact same thing - only the dashboard and tin changed from the series-III 420's. The 440 is a different beast. Deere kept upgrading that one until 1962, and this is where the diesel option began. If i...
- Tue Aug 19, 2008 8:39 am
- Forum: Early model JD crawler technical support
- Topic: 2010 Hydraulics--no pressure.
- Replies: 7
- Views: 6417
- Tue Aug 19, 2008 8:37 am
- Forum: Early model JD crawler technical support
- Topic: 440 crawler dozer blade
- Replies: 3
- Views: 4405
Hi, A blade from an older model won't directly fit onto a 440. The crossbars are different. They are square on the older machines and round on the 440's and larger diameter if I recall. As far as *making* a 62 fit in place of a 63, perhaps someone else has experience to relate. I once looked into wh...