Search found 8 matches
- Sun Jun 19, 2005 10:21 pm
- Forum: Early model JD crawler technical support
- Topic: 1010/350 tracks, something doesn't add up
- Replies: 6
- Views: 9098
Thanks for the replies, The extensive rain yesterday didn't inspire me to go pull the track back off. Time to pay the piper, cleaned the shop instead. Lavoy, I thought the sprockets might be the problem but the links nest 100%, they may already have been 350ified. A 350 track already came off that s...
- Sat Jun 18, 2005 11:44 am
- Forum: Early model JD crawler technical support
- Topic: 1010/350 tracks, something doesn't add up
- Replies: 6
- Views: 9098
I guess I'll have to put a worn pin and bush link in to add some slack. Regarding the press, I will post a pic when I have time in the near future. It is basically a 5 x 7 x 3/8 wall tube with heavy gussets welded on top for the track and cylinder. I basically copied the press out of the service man...
- Thu Jun 16, 2005 11:09 pm
- Forum: Early model JD crawler technical support
- Topic: 1010/350 tracks, something doesn't add up
- Replies: 6
- Views: 9098
1010/350 tracks, something doesn't add up
Hopefully someone can shed some light on my problem... I locally bought a pin and bushing group for my tracks. Between the tracks on the machine and a spare set I have 3 350 tracks and 1 1010. So anyways, I built a press and overhauled 1 350 track for now. I tried to put it on the machine and it's t...
- Sat May 28, 2005 12:53 pm
- Forum: Early model JD crawler technical support
- Topic: JD 2010 What to look for to purchase
- Replies: 5
- Views: 8309
I, as well, bought a 1964 1010 for the same reason, I've run machinery, but never a crawler. I wish I knew more of what to look at when I bought it. It looked good and worked well when I tried out on flat ground, it's history sounded good. The guy I bought it off had it for 5 yrs with no problems, h...
- Sun May 15, 2005 10:53 am
- Forum: Off-topic discussions
- Topic: Knocking down trees with a crawler
- Replies: 20
- Views: 30454
- Wed May 04, 2005 11:08 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 tracks?
- Replies: 0
- Views: 4123
1010 tracks?
Hey Lavoy, couple quick questions about rebushing and pinning my tracks. I was looking at them yesterday, when resetting a lost track and noticed slop between the bushing and chain link. I've talked to local companies, as in, 1 1/2 hrs one way and 3 1/2hrs the other about bushing and pinning my trac...
- Fri Apr 15, 2005 1:52 am
- Forum: Early model JD crawler technical support
- Topic: 1010 Steering Clutch
- Replies: 2
- Views: 7261
cleaning steering clutch disks
I cleaned my metal and fiber disks both with an orbital sander, using 80 grit paper and a light touch. They cleaned up nice, well, alot better than they were. 20 hrs on them so far, since clean up with no noticeable problems.
PJL
PJL
- Mon Apr 04, 2005 11:30 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 track and roller q's
- Replies: 2
- Views: 7252
1010 track and roller q's
Two questions, if I may: 1: I went to grease my new crawler for the first time the other day and found that (2) rollers on the l/h side were different than the (8) others (l/h & r/h). They looked like pillow block bearings on the inside and outside of the track frame and roller, with nowhere to grea...