Search found 80 matches

by ejb17
Tue Sep 13, 2022 6:44 am
Forum: Lavoy's Little Shop O' Deeres
Topic: Lindeman Sprocket & Front Idlers Needed
Replies: 0
Views: 12828

Lindeman Sprocket & Front Idlers Needed

I am in need of 1 Lindeman sprocket part # TE55Y and a set of front idler brackets with an axle, part #'s TE742Y,TE743Y, TE18Y(axle).
Thanks Eric Bauer 716-866-4700
by ejb17
Mon Sep 07, 2020 6:52 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: 1010C Gas for sale
Replies: 1
Views: 3015

1010C Gas for sale

1010C gas for sale. Runs great w/rebuilt carb. Radiator redone with the cooler in the bottom tank. 6 way hydraulic blade w/original joystick valve. Linkage rebuilt on the valve and have the spool kit also. Engine was taken out to put in a new bushing on the reverser input shaft, and engine put back ...
by ejb17
Thu Jul 19, 2018 1:19 pm
Forum: Early model JD crawler technical support
Topic: 1010C Info needed
Replies: 11
Views: 8414

Re: 1010C Info needed

OK everyone, I have a question. Bought the 1010 mentioned above and after looking and staring at the manifold I think it is not the right one. Is it possible that a 2010 Cyl head and manifold would fit the 1010 block? What about just a 2010 manifold on a 1010 head? The cylinder head has definitely b...
by ejb17
Fri Jul 13, 2018 6:41 pm
Forum: Early model JD crawler technical support
Topic: 1010C Gear Shift Pattern
Replies: 7
Views: 10901

Re: 1010C Gear Shift Pattern

Thanks Lavoy, will give you a call by mid week with some other immediate needs
by ejb17
Fri Jul 13, 2018 1:31 pm
Forum: Early model JD crawler technical support
Topic: 1010C Gear Shift Pattern
Replies: 7
Views: 10901

Re: 1010C Gear Shift Pattern

Thanks gentlemen. I should figure it is like the 350?
Also, can anyone or does anyone have the right side steering lever #T16964T and the steering lever shaft #T13903T ?
by ejb17
Thu Jul 12, 2018 3:38 pm
Forum: Early model JD crawler technical support
Topic: 1010C Gear Shift Pattern
Replies: 7
Views: 10901

1010C Gear Shift Pattern

Picking up a 1010C Saturday that we bought and do not know the gear pattern. I am sure I could figure it out but the tower has a short rod welded on to block the lever from going into the top left hand spot so either there is a problem inside or they did it out of convienence to shift faster from th...
by ejb17
Sat Jul 07, 2018 2:07 pm
Forum: Early model JD crawler technical support
Topic: 1010C Info needed
Replies: 11
Views: 8414

Re: 1010C Info needed

So I bought the 1010 and should have it home in a week or so. Shoot me now I suppose. 6 way hydro blade will be nice to have but I have to rebush and re-pin the joystick handle as it is sloppy. I mean really sloppy. Got to get it charging also with new cables needed. A couple of broken bolts and som...
by ejb17
Wed Jun 27, 2018 2:05 pm
Forum: Early model JD crawler technical support
Topic: 1010C Info needed
Replies: 11
Views: 8414

Re: 1010C Info needed

Thanks gentlemen. Lavoy, are the track adjuster seals still available? How about the RH steering lever?
I wonder if I could make rubber tracks fit this one also?
by ejb17
Wed Jun 27, 2018 11:39 am
Forum: Early model JD crawler technical support
Topic: 1010C Info needed
Replies: 11
Views: 8414

1010C Info needed

Looked at a 1010C today with a hydraulic 6 way blade and gas engine. Runs good and looks like the head was replaced at some point. Will need a lot of small things and will probably have to tear into the left steering clutch. Serial tag is there and it is in the 49700 range but no reference of an A o...
by ejb17
Sat Oct 26, 2013 12:51 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: MC Front Idler Wheel
Replies: 1
Views: 2513

New price for a nice MC front idler.
by ejb17
Thu Oct 03, 2013 12:39 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: MC Front Idler Wheel
Replies: 1
Views: 2513

MC Front Idler Wheel

Selling an MC 3 roller front idler that is in good shape. I have it totally cleaned out and ready to ship. $120 If I ever find the correct spring buckets for my lindy I will also have the corresponding left and right spring/axle brackets and axle with dust shields. So if you have the original Lindem...
by ejb17
Sun Aug 04, 2013 8:12 am
Forum: Early model JD crawler technical support
Topic: Lindeman ?'s
Replies: 3
Views: 4003

Thanks. I see them advertise so I will call them.
by ejb17
Fri Aug 02, 2013 2:21 pm
Forum: Early model JD crawler technical support
Topic: Lindeman ?'s
Replies: 3
Views: 4003

Lindeman ?'s

So I am looking at a 1946 Lindeman and have a couple of questions. -Is the pitch of the rails 5.75" like I have read here? -How many pads should I be counting? Just want to make sure before I plunge. Also it needs 1 sprocket-anybody have one? Pins and bushings look real good but I forgot to count so...
by ejb17
Tue Aug 21, 2012 6:39 am
Forum: Lavoy's Little Shop O' Deeres
Topic: 420 Radiator New & In Box
Replies: 0
Views: 2973

420 Radiator New & In Box

Because I am shifting my attention to my 430C I have a brand new A&I complete radiator for the 420C or 430C(w/Heavy Protection front end) brand new and in the box. I believe I paid 365 or so and I want to sell it so $275.00.
Eric 716-866-4700
by ejb17
Tue Aug 21, 2012 6:36 am
Forum: Lavoy's Little Shop O' Deeres
Topic: 420C Battery Box Setup
Replies: 1
Views: 3647

SOLD