I am in need of 1 Lindeman sprocket part # TE55Y and a set of front idler brackets with an axle, part #'s TE742Y,TE743Y, TE18Y(axle).
Thanks Eric Bauer 716-866-4700
Search found 80 matches
- Tue Sep 13, 2022 6:44 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Lindeman Sprocket & Front Idlers Needed
- Replies: 0
- Views: 17491
- Mon Sep 07, 2020 6:52 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 1010C Gas for sale
- Replies: 1
- Views: 3189
1010C Gas for sale
1010C gas for sale. Runs great w/rebuilt carb. Radiator redone with the cooler in the bottom tank. 6 way hydraulic blade w/original joystick valve. Linkage rebuilt on the valve and have the spool kit also. Engine was taken out to put in a new bushing on the reverser input shaft, and engine put back ...
- Thu Jul 19, 2018 1:19 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Info needed
- Replies: 11
- Views: 9237
Re: 1010C Info needed
OK everyone, I have a question. Bought the 1010 mentioned above and after looking and staring at the manifold I think it is not the right one. Is it possible that a 2010 Cyl head and manifold would fit the 1010 block? What about just a 2010 manifold on a 1010 head? The cylinder head has definitely b...
- Fri Jul 13, 2018 6:41 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Gear Shift Pattern
- Replies: 7
- Views: 11792
Re: 1010C Gear Shift Pattern
Thanks Lavoy, will give you a call by mid week with some other immediate needs
- Fri Jul 13, 2018 1:31 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Gear Shift Pattern
- Replies: 7
- Views: 11792
Re: 1010C Gear Shift Pattern
Thanks gentlemen. I should figure it is like the 350?
Also, can anyone or does anyone have the right side steering lever #T16964T and the steering lever shaft #T13903T ?
Also, can anyone or does anyone have the right side steering lever #T16964T and the steering lever shaft #T13903T ?
- Thu Jul 12, 2018 3:38 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Gear Shift Pattern
- Replies: 7
- Views: 11792
1010C Gear Shift Pattern
Picking up a 1010C Saturday that we bought and do not know the gear pattern. I am sure I could figure it out but the tower has a short rod welded on to block the lever from going into the top left hand spot so either there is a problem inside or they did it out of convienence to shift faster from th...
- Sat Jul 07, 2018 2:07 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Info needed
- Replies: 11
- Views: 9237
Re: 1010C Info needed
So I bought the 1010 and should have it home in a week or so. Shoot me now I suppose. 6 way hydro blade will be nice to have but I have to rebush and re-pin the joystick handle as it is sloppy. I mean really sloppy. Got to get it charging also with new cables needed. A couple of broken bolts and som...
- Wed Jun 27, 2018 2:05 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Info needed
- Replies: 11
- Views: 9237
Re: 1010C Info needed
Thanks gentlemen. Lavoy, are the track adjuster seals still available? How about the RH steering lever?
I wonder if I could make rubber tracks fit this one also?
I wonder if I could make rubber tracks fit this one also?
- Wed Jun 27, 2018 11:39 am
- Forum: Early model JD crawler technical support
- Topic: 1010C Info needed
- Replies: 11
- Views: 9237
1010C Info needed
Looked at a 1010C today with a hydraulic 6 way blade and gas engine. Runs good and looks like the head was replaced at some point. Will need a lot of small things and will probably have to tear into the left steering clutch. Serial tag is there and it is in the 49700 range but no reference of an A o...
- Sat Oct 26, 2013 12:51 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: MC Front Idler Wheel
- Replies: 1
- Views: 2553
- Thu Oct 03, 2013 12:39 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: MC Front Idler Wheel
- Replies: 1
- Views: 2553
MC Front Idler Wheel
Selling an MC 3 roller front idler that is in good shape. I have it totally cleaned out and ready to ship. $120 If I ever find the correct spring buckets for my lindy I will also have the corresponding left and right spring/axle brackets and axle with dust shields. So if you have the original Lindem...
- Sun Aug 04, 2013 8:12 am
- Forum: Early model JD crawler technical support
- Topic: Lindeman ?'s
- Replies: 3
- Views: 4057
- Fri Aug 02, 2013 2:21 pm
- Forum: Early model JD crawler technical support
- Topic: Lindeman ?'s
- Replies: 3
- Views: 4057
Lindeman ?'s
So I am looking at a 1946 Lindeman and have a couple of questions. -Is the pitch of the rails 5.75" like I have read here? -How many pads should I be counting? Just want to make sure before I plunge. Also it needs 1 sprocket-anybody have one? Pins and bushings look real good but I forgot to count so...
- Tue Aug 21, 2012 6:39 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 420 Radiator New & In Box
- Replies: 0
- Views: 3006
420 Radiator New & In Box
Because I am shifting my attention to my 430C I have a brand new A&I complete radiator for the 420C or 430C(w/Heavy Protection front end) brand new and in the box. I believe I paid 365 or so and I want to sell it so $275.00.
Eric 716-866-4700
Eric 716-866-4700
- Tue Aug 21, 2012 6:36 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 420C Battery Box Setup
- Replies: 1
- Views: 3683