JDcrawlers Messageboard

I got my 1010 up and moving even pushed a few things around. Looks like a sticky advance was some what of the problem and some old wiring that i replace did the trick. But in order to run I have my carb way out of standard adjustment. I have both screws open just about a turn. I have the original ca...

Thanks for leads guys I had allready changed the negititve battery cable because it was frayed and now I have looked at the postitive and found some bear spots also the advace is a little sticky so I'll try these. Machine runs well when not moving. Any comments on Zeith carbs are these an improvment...

I pulled the screen and changed the gas and the carb, runs good at low idle and at high idle at times but not under power while moving skips out

Can't get my 1010 to run smooth, I have change plugs,wires'points, cap, rotor,plugs, and coil and even bought a new zieth carb but runs better with old one. Its seems to me like I have some kind of short. I once had an Alis with a bad igniton switch that had these problems but I omhed everthing out ...