JDcrawlers Messageboard

think i can get u a top roller here in saint john it is off 1010 5 roller let me know uf u are interesed should be cheap,

did u get pic. of 1010 bottom i sent has some of those parts dont know shape but it may be worth trip at 20 cents a lb u may get what u need fairly cheap

ill try to email pic. can buy 20 cents a lb

ill try to get some pic.think they are full tracks with rollers and idilers

know where there is a set of 5 rollers how far from saint john nb canada are u in maine im 60 miles fr. calais

could i get by with a light grease for winter

Hi glad to say old girl working pretty good she pushed 69 loads of clay and didnt seem to mind.But i got a crack in reverser on other side of shaft hard to get to and im wondering if i dont use reverser would it hurt to run it dry, right now i keep it wrapped in diappers but they keep coming off. I ...

have acess to some rollers and idilers seem to be in good shape roll smooth and straight wondering what they would be worth

1 side is losse the other i have tried hammer and screwdriver but it will not budge wondering about heat got my adjusters working with heat will i hurt anything heating up nut on end of cylinder.Thanks john

kit is obsolete,is it a tough job,are there any springs that are going to fly apart.Can a novice take it apart and fix it or should it be taken to shop thanks john

Do i need a kit or just replace all o ring.Thanks john

wondering if it would be that easy to change from manual adjuster to hydriolic

Hi next problem for me is leak on lift cylinder, see 2 o rings in parts diagram,are they what usually are bad ,or do u normally haft to go father down shaft to stop leak thanks john

thanks wondering if i can take the hydralic adjusters and front wheel that track drive on and change with mine, would it be possible that they interchange, i can get adjusters and springs and wheel if i want, my adjusters are seized,so if i can interchange them it would be great.Thanks john

Wondering if i can just switch track from jd 1010 with 440ic,or if i have to do anything extra or are they interchanable thanking u in advance john