Search found 6 matches

by BVD
Fri Feb 05, 2010 11:16 am
Forum: Late model JD crawler technical support
Topic: 350b fuel pump shaft seal
Replies: 8
Views: 8610

350 fuel pump

Hi, Thank you flatheadyoungin for taking the time to reply you all have been a great help thanks. Bob
by BVD
Thu Feb 04, 2010 6:08 pm
Forum: Late model JD crawler technical support
Topic: 350b fuel pump shaft seal
Replies: 8
Views: 8610

350 fuel pump

Thanks for all your help. Bob :lol:
by BVD
Thu Feb 04, 2010 10:58 am
Forum: Late model JD crawler technical support
Topic: 350b fuel pump shaft seal
Replies: 8
Views: 8610

Fuel pump 350 crawler

Ken, I have a diesel model, and its a db pump. I have a manual but when i took it off i pulled the pump and not the shaft so l,am installing the two seals on that shaft. the front one won,t side all the way in without turning over alittle. I thought about pulling the shaft out and taking it with the...
by BVD
Wed Feb 03, 2010 8:03 pm
Forum: Late model JD crawler technical support
Topic: 350b fuel pump shaft seal
Replies: 8
Views: 8610

350b fuel pump shaft seal

I bought a rebuilt fuel pump, i put it back on and the shaft seal keeps getting turned over and then leaks fuel into the crankcase. Is there any tricks to doing this? i have a tool from the pump place that i bought for this , I put lots of lub on the shaft but dosen,t seem to help. Thanks for any in...
by BVD
Fri Oct 24, 2008 7:49 am
Forum: Late model JD crawler technical support
Topic: jd350
Replies: 2
Views: 3150

jd 350 starts than stops

The 350 is a diesel and you are right about the pump as i took it in and they said it had a disenagrated plastic part and repaired it for 600.00. Thank You for replying to my question. BVD
by BVD
Sun Oct 12, 2008 8:54 am
Forum: Late model JD crawler technical support
Topic: jd350
Replies: 2
Views: 3150

jd350

I have a 350 that I just purchased, IT starts up runs good for about two or or three minutes then quits. The fuel filters were just changed but i replaced them anyway, i replaced the manual fuel pump and tried loosening the return line but still end up with the same problem. I'am hoping someone can ...