Search found 41 matches

by spenceraucoin
Tue Oct 04, 2011 8:55 pm
Forum: Early model JD crawler technical support
Topic: Hyd ram size??????????
Replies: 1
Views: 2787

Hyd ram size??????????

I have 3 in bore size rams can i put 2 in rams on it, need help.... :oops: rams are on a 1010 dozer 1000psi running psi.
by spenceraucoin
Wed Sep 28, 2011 5:01 pm
Forum: Early model JD crawler technical support
Topic: Hydralic Filter?????????????
Replies: 1
Views: 2969

Hydralic Filter?????????????

Does aney one thank or shuld put a spin on filter on my 1010 dozer, it does not have one why not? :?: :oops: :shock:
by spenceraucoin
Wed Aug 10, 2011 7:50 pm
Forum: Early model JD crawler technical support
Topic: 1010 steering and clutch questions
Replies: 17
Views: 20943

1010 seals

hello seals are a deere item 25 or 30 apiece need 2 , might can cleen breakband you might can cleen oil out, breakbands lovay can get that for you, you will have to tare down cluch housing , each side has a quil that supports a main gear and it has a seal that needs to be replaced, its leaking gear ...
by spenceraucoin
Wed Aug 10, 2011 6:04 pm
Forum: Early model JD crawler technical support
Topic: 1010 steering and clutch questions
Replies: 17
Views: 20943

1010 cluches

If you cant steer left or right you have oil on brack bands, you will need to change oil seals on left and right steering housings. Ive done this on my 1010 ,
by spenceraucoin
Sun Nov 07, 2010 7:47 pm
Forum: Early model JD crawler technical support
Topic: OIL ON BRAKEBAND !!!!!!
Replies: 0
Views: 2516

OIL ON BRAKEBAND !!!!!!

Hello got oil on brakeband on my 1010 dozer changed seal once and put it in wrong so i had to change it again, I put the new seal with lip towards ring gear, work machine maybe 2 days a month, worked fine for 2 times sence i changed seal then got on side of hill with machine then little oil driped o...
by spenceraucoin
Sun Sep 05, 2010 10:42 pm
Forum: Early model JD crawler technical support
Topic: 1010 Diesel ENGINE RPM?????????????????
Replies: 1
Views: 3081

1010 Diesel ENGINE RPM?????????????????

Hello, I would like to know what rpm to work crawler, full, half, low ,
by spenceraucoin
Wed Aug 11, 2010 7:16 pm
Forum: Early model JD crawler technical support
Topic: 1010 engine exchange???????????
Replies: 2
Views: 4159

1010 engine exchange???????????

will 1010 tractor engine fit a crawler? what about parts are they the same? :twisted:
by spenceraucoin
Sun May 30, 2010 9:08 am
Forum: Early model JD crawler technical support
Topic: 1010 looking for sheilds?
Replies: 1
Views: 2961

1010 looking for sheilds?

Would like to buy right and left side, aney body got sheilds for sale let me know? :roll:
by spenceraucoin
Tue Apr 20, 2010 7:46 pm
Forum: Early model JD crawler technical support
Topic: 1010 roller info?
Replies: 1
Views: 3105

1010 roller info?

Have a roller that is bad, is it easy to rebuild or where can i buy one,does rollers inter change 350 to 1010 need info? :twisted:
by spenceraucoin
Thu Feb 18, 2010 2:32 pm
Forum: Early model JD crawler technical support
Topic: 1010 rolers
Replies: 0
Views: 2322

1010 rolers

Need to know if 350 rollers would fit 1010, can you repair rollers with new sleves . need info,,,,,,,,,,,,,,,, :roll:
by spenceraucoin
Sun Jan 24, 2010 2:39 pm
Forum: Late model JD crawler technical support
Topic: Dozer 450c operating question
Replies: 2
Views: 4077

blade

Might sharpen the bottom of your blade, dozer blades are just like a knife got to keep sharp............................................................
by spenceraucoin
Wed Jan 13, 2010 9:24 pm
Forum: Early model JD crawler technical support
Topic: frozen steering clutch shaft
Replies: 8
Views: 7812

1010 shaft

cut shaft, hammer the pices out change brass sleves top and bottom, and try to salvage the fork if you can. only do this if you cannot get it to move, i had the same problem and had to cut shaft, lube shaft ends when putting new ones, :shock:
by spenceraucoin
Wed Jan 06, 2010 8:33 pm
Forum: Early model JD crawler technical support
Topic: 1010 oil seal installing info
Replies: 3
Views: 4400

1010 oil seal installing info

Thanks ,just figured out i put it in wrong. Is there a easy way to get the quill out without taking cluch housing off, not final, but the housing,can i take the back housing off and tap it out??????????
by spenceraucoin
Wed Jan 06, 2010 6:32 pm
Forum: Early model JD crawler technical support
Topic: 1010 oil seal installing info
Replies: 3
Views: 4400

1010 oil seal installing info

Hello need to know how to install the oil seal, there are two sides flat side and a lip side , does aneybody know the right way to install seal in quill??????????????????? :roll: