JDcrawlers Messageboard

For sale: complete 3-point hitch like new (less upper link) - J.D. 350B. Excellent condition. Best offer. Ontario. Came off the dozer in attached picture with only 1600 hrs on it. Dozer not for sale. https://drive.google.com/file/d/1DerFRo3_YyXP9rUHbf9vsnXFWXz7Vpfn/view?usp=sharing https://drive.goo...

Does anyone know the cost/value of a very good used 3-point hitch unit including everything required to operate it, such as cylinders, hoses, and controls? Thank you for any knowledge on this matter.

Correct, Lavoy; no top link. I have photos but haven't figured out how to post them

Can anyone advise me as to the value of the entire 3pt hitch assembly, including cylinders, hoses and remotes? This assembly is in mint condition.

Lavoy, does the regulator on these units do anything else but regulate the current going to the battery? In other words, can I put in a new 12volt alternator and just chuck the regulator? Thanking you, jmf.

Anyone know where I can obtain the 6-wire regulator for my 350b. Did all the tests and this appears to be reason battery not charging. Been told i can pay half the price for new alternator (present one tested fine) and bypass the regulator. Not sure about that one. Thanking anyone for replies. jmf.

there is an ad in our local area for a 350 Trim dozer. What is a "trim" dozer? Thanks All smaller dozers which are primarily used for finer work around buildings or highway ditching, etc. Generally, they have a smaller footprint, and a lower center of gravity. "Trim" definition is common Canadian j...

Can anyone tell me the JD part number for the 6 inch spring that prevents the clutch from remaining in the down or depressed position?

Thanking you,
Jim

I just finished servicing my adjusters...quickly split the tracks pulled it out...8000 psi, then cleaned and replaced all seals. Do it right the first time and you will be pleased.
Regards,
jmf.

Wanted: good functional winch and logging arch for JD350B

Gentlemen,

How do we download a picture to be inserted on this site?

jmf.

Hello, the JD 3600 logging arch bolts to the back of the final drives and bolts to the top of the JD 3310 or 3315 winch. i believe u dont need any special brackets, rops should bolt to the arch. andrew http://i12.photobucket.com/albums/a247/jd430c/05-10-2009094553AM.jpg Andrew, The ROPS I have is t...

I am considering selling an almost never used 3-point hitch system off my JD350B. I am also in the process of installing an ROPS on this less than 1300 original hrs machine. Question: Can an appropriate JD logging arch be installed on this machine? Does it fit in the same four holes that each rear a...

Being relatively new to this site, what is the availability of an ROPS for a 350B or C machine?
jmf.

Can a ROPS be installed on a 350B crawler dozer that is already equipped with a 3-pt. hitch? And if so, what is the availability of a roll-over-protection unit for this dozer?

Thanking you,
jmf.