Search found 170 matches
- Mon Dec 20, 2010 7:14 pm
- Forum: Early model JD crawler technical support
- Topic: Removing an 831 loader
- Replies: 10
- Views: 11038
831 Specifications from Deere Manual
Dozer blade for the 831 is 72" wide and 23" in height with a 9.5" depth of cut. Here is some additional information for the bucket on the 831. Pry out at ground level: 8500lbs Bucket lift at ground level: 7000lbs Full height lift: 3300lbs Drop below ground level w/bucket level: 4.5" Drop below groun...
- Sun Jun 28, 2009 10:14 am
- Forum: Early model JD crawler technical support
- Topic: Drott for 440
- Replies: 2
- Views: 3931
- Sun Jun 28, 2009 7:54 am
- Forum: Early model JD crawler technical support
- Topic: Need a Air Cleaner cup
- Replies: 9
- Views: 9547
Air Cleaner Cup
My 440ICD needed an air cleaner cup as well. Like Brad, I looked for a long time and finally found an entire air cleaner. If I recall, it came from Arkansas. My old cleaner was pretty beat up so I just replaced the entire unit. I think the only thing I saved from my old one was the cup clamp.
- Sun Jun 28, 2009 7:43 am
- Forum: Early model JD crawler technical support
- Topic: Drott for 440
- Replies: 2
- Views: 3931
Drott for 440
I found this bucket locally. They state if came off a 1010 machine. Anyone know if this will fit a 440? I have not seen many of these but the support in the middle seems odd but looks original.
- Sat Mar 21, 2009 8:05 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350
- Replies: 2
- Views: 4196
- Sat Mar 21, 2009 7:46 am
- Forum: Late model JD crawler technical support
- Topic: JD 350
- Replies: 2
- Views: 4196
JD 350
Going to go look at a 350B, anything specific I should be looking for in terms of issues for 350's? I have a 440ICD but I thought I recall reading that 350's have some issue with bolts coming loose and causing some major issues. I searched around a little and could not find any postings on this topi...
- Sat Mar 07, 2009 6:28 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
Lavoy: Thanks. The ridge is 3/16" thicker....The track will ride up on that, wow. I will reshim the idler while it is off the machine to make sure the idler is running true and reinstall. Getting this on and off is really no big deal. I do know the track frame is in pretty good shape. Not bent and I...
- Sat Mar 07, 2009 5:11 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
OK, remeasured all the alignment and while not exactly the same as the good side, it is VERY close. I split the track and removed the idler. I think I found the problem. The alignment must have been bad for along time and the idler is worn such that there is a large thickness ridge on the idler. Wit...
- Mon Mar 02, 2009 10:18 am
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
Lavoy: Thanks. I was starting to worry about this as well since when I took the machine off the jack stands and drove it back to the shed, the alignment changed a little. That involved some turning so that was not a good test. The plan now is to repeat all the alignment measurements to make sure I d...
- Sun Mar 01, 2009 2:45 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
- Sun Mar 01, 2009 1:06 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
Thanks for the clarification. Based on my attempts yesterday, adding or removing shims does not seem to change the alignment and I added and removed a lot of shims (10). I worked boths side independently. Idler is still touching the track links on the outer side. I did all this with the machine on j...
- Sat Feb 28, 2009 4:02 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
No Luck
Ok, spent the day trying to fix this alignment issue, no luck . :( Measured the track alignment on both sides and as best as I can tell, they are both the same. I also looked at the upper support idler/roller and the clearances to the track looks good. Sprocket also does not show any excessive wear....
- Mon Feb 23, 2009 10:45 am
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
Lavoy: Thanks. I will check this out. I recall making sure the sprockets were centered relative to the frames when I did my rebuild but will recheck everything. The right side track seems to run true so I am hoping this is a left side only alignment. I think I will just jack the machine up and align...
- Sun Feb 22, 2009 2:22 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
- Sat Feb 21, 2009 3:52 pm
- Forum: Early model JD crawler technical support
- Topic: 440 Idler Wheel Alignment
- Replies: 15
- Views: 16107
440 Idler Wheel Alignment
Have not posted in a while but my 440 ICD has been pretty healthy since my rebuild. Was using it today to skid trees out from a December ice storm in NY, what a mess. I am having one small isssue. Getting significant wear on the left side of my left side idler wheel. I was looking at the manual to a...