JDcrawlers Messageboard

I think I will look for a 2 bottom, I have a 1 bottom trip plow, maybe I will try that first.

Thanks for the help,
Denis

I have a 3-14 trailer plow that I wanted to try behind my MC this spring in some heavy graound, will I be able to pull it or am I asking for trouble. Maybe I should look for a 2 bottom.

Thanks for any opinions,
Denis

I am in need of what I call the axle shaft for my MC here is a picture, http://i671.photobucket.com/albums/vv76/djh2nd/John%20Deere%20MC/101_0257.jpg the shaft is six spline 1 3/8" diameter, I also need new clutch friction materials for the left steering clutch and either a relined brake band or a l...

What I need is the 6 splined shaft that goes from the Center of the tractor out to the Steering clutch, it is about a foot long and the splines are the same as a pto shaft

The only ones I found were 3 spline not the 6 spline like I need

I had problems with getting my MC to move last winter and over the summer I got it tore down and figured out that the shaft that goes from the ring and pinion to the left steering clutch was sheared off, I need a new one and have not been able to find one any where. I hope someone here can help me. ...

I posted on here last winter that my MC was not getting power to the left track. After finally getting around to tearing it down I discovered why. The left axle shaft was twisted in two. I have called several salvage yards in my area but none can come up with one. One Idea a friend of mine had was t...

I found out that the left clutch is stuck in the disengaged position and the left brake is stuck to the drum. The cause of no movement is the engine clutch slipping so it looks like I will be duing a full on restoration of the crawler this spring. Thanks for all the help it is greatly appreciated. T...

The brake pedal is in the released position I plan to try and free the track tomorrow but may not have time and the temp is only suposed to get to 5 above for thursday and friday but up to 20 on saturday. I really want to get it fixed for pulling out trees for fire wood as my cletrac is down in need...

The engine clutch is adjusted properly. It is supposed to get up to around freezing in the next couple days if I should get it to move what do I need to check in the way of adjustments and how it operates to properly diagnose the problem and where can I buy a service manual I have all the original o...

I am completely unaware of how to adjust or repair anything after the trans on these. Where and what am I looking for to check for misadjustment or wear. The left steer lever is also harder to move and I cant pull it back all the way.

Thanks, Denis

This is my first time posting here. I have a problem with my MC that has been parked for about a year. When I put it in gear and release the foot clutch the right track starts to move but stops and the left is frozen to the ground and dosent even try to move. I can release the foot clutch all the wa...