JDcrawlers Messageboard

The shaft on my hyd. pump broke and I was wondering if anyone had a junker or knows where you can get parts for this pump(hydreco part#1512D1). If not what would be a good replacement pump I need to know how many gpm and at what rpm?

thanks,Jim

I HAVE A 59' 440 ICD WITH 12" PADS THAT ARE FOR HIGHWAY USE, WONDERING WHERE I MIGHT FIND SOME CLEATS FOR THIS MACHINE. CAN,T GET MUCH GRIP IN THIS SOUTH GA. CLAY!

I have a 59' 440 icd with a 6-way blade.

I JUST REBUILT A 2-53 FOR MY 440ICD. MINE ALSO WOULD REV LIKE IT WAS GOING TO BLOW, MINE HAD ALOT OF OIL BLOWBY AND I THOUHT I HAD A BROKE RING ONLY TO FIND TAHT MY CYLINDER HEAD WAS CRACKED. I HAVE FOUND A PLACE IN HOUSTON THAT HAS 4 NEW SURPLUS CYLINDER HEADS FOR THE 2-53,I WILL HAVE TO LOCATE THE...

HI, I just got my 440 icd put back together this past weekend and finally got to play a little and it is awesome! As i was playing my steering works great in reverse but in foward it is slow to grab. My qustion is where to start, would this be clutches or brake band or both,thanks for all the info. ...

I tore my engine a part and took my head to our local machine shop only to find out my head was cracked. I have not had any luck at locating one, any assitance would be appreciated. THANKS, JIM

Thanks for the advice on the valves, I am now having difficult finding new sleeves,pistons,rings, and bearings. We have two John Deere dealers nearby and neither could get the parts. I was told to to check with an after-market parts dealer. Any sugestions on a good dependable parts supply. jim

I just recently purchased a 440 diesel dozer that has alot of oil blowby coming out of the mufler, I was wanting some input on how dificult it is to do an overhaul on this engine. I was planning to pull the head and have a valve job and replace sleeves,pistons,rings and bearings. Would this be a dif...