JDcrawlers Messageboard

First of all I'd like to thank this message board and all it's posters ! I've put my machine all back together with positive results! It will finally steer in both directions with the added power of both tracks powered, my property should be alot easier to clear! I got my finals back on I didnt have...

This guy is in fla. 863-419-0191 ask for rich he found me some hard to get parts and is very prompt with shipping! Mike Lavender '65 350 Dozer 152 cuin. gas motor!

Haven't had much time!got the correct numbers for the throwout adjustment! got my clutch housing bolted back up! man, it was easier taking the frame bolts out then goin back in!got a new boot for the brake rod and freed up the adjuster ! My property is about 20 acres of which maybe 7 are semi flat t...

well finally I'll get back to work on my dozer! I recieved the brake control lever that goes on the steering control shaft I freed up that shaft and the throwout shaft! everything is clean well greased and ready to be put back together I'll keep ya posted gonna snap some pics before I put it all bac...

Man, to hear you guys gonna put water in a dry clutch housing blows me away! I 'm sittin waitin on parts from a total linkage rustoutmeltdown! I had a few old timers tell me moisture and dry clutches dont mix , Hell I may be wrong but you wont find me doin it its a dry housing and I plan on keepin i...

I've waited all week on parts ! 1 wrong part and have to wait 3 more days to get it here! I changed the bushing that goes to the trans case new pilot bearing!all new clutch disc's sand blasted the metla disc's, found out the height adjustment for the clutch fingers was 1.579 inches off of the brake ...

About to put together my final! have the parts except the mythological JD-7 tool can anyone just tell me the measurement in inches of the height of the clutch finger off of the brake housing? for the steering clutch pressure plate adjustment? The measurement would have to be taken of of the gauge! t...

well monday approaches I'll be calling around looking for four parts! I've found four places ,but am waitin to talk to lavoy in the am from this message board I've gained the confidence and the knowledge to fix my dozer! hell I know dozer mechanics around here but to get to my place costs$$$$$$ I fi...

I got the steering clucth housing off today loaded up the parts and was off to the machine shop! completely sand blasted the steering clutch housing inside and out ! god what rust can do to the linkage!!!!!I had the brake housing for the clutch sand blasted too to remove all the rust! sanded flat al...

Have the dozer in a carport! thanks for the encouragement! Well today I got the final off with some obtuse angles, bad news all the brake linkage throwout and clutch shafts all froze ,Have worked the clutch pack loose from the final lost three fibers . The entire pack was a solid mass, now I see why...

well I've learned a great deal ! with the knowledge I've gained from here and a jd service manual I'm going to pull oneside of my finaldrive today. I learned a few new cuss words trying to get the master pin from a 44 yearold track it was hell but it's done I've pulled the bull gear and I'm about to...

call 417-844-1714 found this this am!!!springfield mo craigslist! farm and garden

the loader sold

Found this this am! item #230304950137 ebay people always lookin maybe someone can get a deal!!!! by the way Roll Over Protection!

I have recently purchased a jd 350 model 6300 ser# 4f1c013127 was wondering year? I've found a problem with the steering controls, after further inspection I've found that one of the clutch control arms is sheared off of the vertical shaft. Me being a backyard mechanic, a pretty good one I might add...