Search found 53 matches
- Mon Mar 02, 2009 7:46 am
- Forum: Early model JD crawler technical support
- Topic: Idler bracket
- Replies: 6
- Views: 5009
Idler bracket
I have my 1958 420c undercarriage apart. Does anyone know if the idler bracket is steel or iron? JD part# m1824t & m1823t. The pin bore is worn and I would like to weld and rebore back to size. Had anyone welded these in the past???
- Fri Feb 27, 2009 3:10 am
- Forum: Early model JD crawler technical support
- Topic: Wear limits on the O.D. of rollers and idlers. (420c)
- Replies: 12
- Views: 9461
Re: wear limits
Joe, Based on NOS parts the front idler is 19 1/4 " with a width of 1.800 across the vertical guide flanges.This part is as cast so a tape measure was used to obtain dimensions.Bottom roller is 7.187 "in diam Left rollers are shot. I am measuring 19 1/8" x 1.73" on both front idlers and 7.15" on th...
- Thu Feb 26, 2009 3:13 am
- Forum: Early model JD crawler technical support
- Topic: Thinking about buying a JD 1010 Edit: New pictures
- Replies: 16
- Views: 17230
This machine looks like it is on the no maintinance program. The seller does not seem to take care of his equipment. It's all muddy and never got cleaned off. I don't mean washed, but at least shovel it off. If he did not have time to do this esspecially in the winter makes me wonder how much he car...
- Wed Feb 25, 2009 1:30 pm
- Forum: Early model JD crawler technical support
- Topic: Lock washers on pad bolts???
- Replies: 15
- Views: 17287
Lock washers on pad bolts???
Quick Question- Do you use lock washers on the pads bolts??? Most of the bolts on my tracks have lock washers, Except the loose ones. The nuts are rusted tight but yet the bolt is loose. It is like the lock washer "Magiclly Disappeared". I am assuming the washer broke after the nut siezed. I am plan...
- Thu Feb 19, 2009 10:00 am
- Forum: Early model JD crawler technical support
- Topic: Wear limits on the O.D. of rollers and idlers. (420c)
- Replies: 12
- Views: 9461
Lavoy, I intend to replace all 5 rollers on the left side. It is just one assembly is so bad I don't have any parts to re-use/work with. The other four rollers are good except the roller flanges are wore off. I am a machinist and was considering making my own rollers to put on the deere pins and cas...
- Thu Feb 19, 2009 9:07 am
- Forum: Early model JD crawler technical support
- Topic: Wear limits on the O.D. of rollers and idlers. (420c)
- Replies: 12
- Views: 9461
Berco rollers
Jim, Are berco rollers available thru any deere dealer, or do I have to go thru your dealer??? I am going to need at least one roller assembly. One rollers i.d. bearing was so bad it ate the seals and half of the pin. There is noticable wear on the end castings. The other pins and end castings look ...
- Thu Feb 19, 2009 3:00 am
- Forum: Early model JD crawler technical support
- Topic: Wear limits on the O.D. of rollers and idlers. (420c)
- Replies: 12
- Views: 9461
Thanks Jim, knowing the material is very helpful. Now I am wondering what the stock size the O.D. of the rollers and idlers should be? How much wear is tolerated? The right side rollers look o.k.. I will have to mic. them for wear and decide if I want to build them up as well. I was also considering...
- Wed Feb 18, 2009 3:11 am
- Forum: Early model JD crawler technical support
- Topic: Wear limits on the O.D. of rollers and idlers. (420c)
- Replies: 12
- Views: 9461
Wear limits on the O.D. of rollers and idlers. (420c)
I just purchased a 5-roller 420c. The undercarriage needs some work. The previous owner had to remove a track link to get the tensioners to work. On the left side the first four rollers have the R.H. flange wore off and the front idler bushing is completly wore out. It is so bad the track does not s...