JDcrawlers Messageboard

I sure do agree with Lavoy on this one. I bought a 350 that would only go in one direction for a good price (or so I thought). I did all the work on the tear down and still spent 2500 in parts to get it back together. Good now but when I tore into it found all the little stuff that needed to be fixed.

My 350B lost power and now barley seems able to pull itself. I checked the fuel to make sure no water was in the fuel. I have even changed the fuel filters and the line. There was a little sediement but nothing that seemed out of the ordinary. I also ensured the airfilter wasn't plugged up. This did...

I would be intrested in purchasing th whole machine from you. If you would e-mail me at richardprather2@hotmail.com so we can talk as I have a parts 1010 and would like to try and make a whole machine.

thanks, Richard

Thanks for the info. I now have my 350 in a fully operational state, it only took 4 months for a reverser and track rebuild as well as repairs to frame wear and many old striped bolts being replaced. Now to use for a while!

I just finished a complete rebuild on a 350B and it now works great. I had a very similar problem and after checking both pressures as discribed in the repair manual and both were good found I had problems with the reverse side pack due to wear on the housing the disc set sits in so take a look to s...

I have read and learn a lot on my 350B here and now find myself in need of help. I did buy the shop manual and have rebuilt my reverser/final drives and rotated the pins in my tracks. What I need help with is on the motor I cannot find where the tach cable attaches to the desiel motor. It wasn't hoo...

I have a gas motor with an exhaust manifold that I would sale. send me an e-mail with your exact motor and I'll make sure it is the correct one.

Richard