JDcrawlers Messageboard

77 Ford, I appreciate the reply. I spoke to a Mechanic at a local John Deere dealer today, and explained my situation to him. His suggestion was to check the fuel cap, to see if the vent was clogged. Haven't had a chance to check the cap yet, but have noticed pressure in the tank when I go to refuel.

Thanks for the replies. I think I'll change the fuel filter tomorrow just to see if that makes any difference.
If it turns out to be the IP head being worn, is that something that can be rebuilt, or would the pump have to be completely replaced?

Hey guys, Im looking for your ideas on a starting issue on a 1996 450G. Dozer starts easily when cold but after it's ran for about 30 minutes, and you shut off the engine, it will just sit and crank till you kill the battery, and never start back. You can hit it with a small shot of starting fluid, ...

Hey jdemaris, I haven`t had a chance to try the winch again, i think its rained everyday since i started this project. As soon as it stops raining i`m gonna try and rev up the engine to see if that will make the winch release. What would estimate the cost to be to replace or rebuild the pump in the ...

Hey jdemaris. Thanks for the reply. The 350B that i have doesn`t have the reverser on it. If i`m not mistaken the winch thats on the dozer is a model 3315. I`m not really sure what type of control valve the dozer has. I was just wondering, if it will "winch in" shouldn`t it also free spool ? Or is t...

Hey Folks, I recently bought a 350B w/winch and i can`t seem to get the cable to unroll. I was wondering does this winch have a freespool ? It will roll its self up but i can`t seem to get it to unroll. Does the pto have to be engaged for the winch to unroll, does the dozer have to be in neutral, wh...