JDcrawlers Messageboard

Thanks Leonard, I have just noticed most of them broke that I have seen [ not that I have seen that many ] I have just had the dozer completely apart and put seals or rebuilt what needed, its a 1973 350B with 1049 Hrs. the prevous owner had just replaced one and the other one is broke also, I am rea...

I'm just curious how many 350's out there has the big recoil spring on the slack adjuster broke :? seems like everyone I've seen has been broke, is that the nom? or not, and is it something that should be replaced right away or is it no big deal, just like to know what everyone else experience has b...

It has an isolator not a clutch, more then likely the older style that has the springs, the ones that came in the 350 D was rubber, I just changed the one in my B to the newer style and your looking at 2500 to up grade it, I do understand some of the late C's came with the later style isolator. Good...

No I didnt have any trouble putting them on.

Its jacked up with no tracks, and in 2nd gear.

Just put the finals back on 350B, everything doubled check, finger height, and adjustments, its jacked up with the tracks off, when you lock up ether side it pulls the engine down 2 to 300 RPM's, has anyone tried this, I would have thought it wouldnt put any load on it :? , just for the heck of it I...

What are you working on

Sounds like the right clutch is slipping, if adjusted right then proberly something bad inside, pressure plate or maybe clutches just woren out

Thanks for the pic, but there not the same.

Thanks for the help, it dosnt look like it is the same

Anyone knows if a 450 and 350B dash is the same?

Looking for a good dash that has the hole for a tech in it for 350B. Mike 4233239547

No forgot to say, but its a crawler dozer.

Does anyone know I think its called the cowl [ the piece that you can put your feet on and the dash goes in] is the same on 350 and 350B. Thanks

I found my parts at Deere.