I'm sure someone will chime in soon on the machine, but if it has a 3 cyl engine it's a 350. If it's a 4 cyl it's a 450.
What is the major problem with the machine?
There's alot of help and wisdom here.
Brian
Search found 15 matches
- Tue Jan 01, 2008 10:27 am
- Forum: Late model JD crawler technical support
- Topic: newbie 450 questions (edited)
- Replies: 11
- Views: 12466
- Wed Jan 03, 2007 3:25 pm
- Forum: Late model JD crawler technical support
- Topic: another 450 question
- Replies: 7
- Views: 9918
- Wed Jan 03, 2007 3:20 pm
- Forum: Late model JD crawler technical support
- Topic: 450 Steering Clutch Adjustment
- Replies: 4
- Views: 7336
- Wed Jan 03, 2007 3:17 pm
- Forum: Late model JD crawler technical support
- Topic: John Deere 350 adjustment
- Replies: 2
- Views: 11574
Lavoy is right. The way I check is to lift off the seat, straight down is a plate w/4 bolts. remove the plate and very carefully operate the dozer. You will see the ring gear spinning as the machine moves. When you pull back the steering lever, and the machine stops moving, if the ring gear stops, i...
- Wed Jan 03, 2007 3:12 pm
- Forum: Late model JD crawler technical support
- Topic: oils for JD450
- Replies: 2
- Views: 4997
- Wed Jul 26, 2006 8:43 pm
- Forum: Late model JD crawler technical support
- Topic: Need help with steering clutch on JD 450B
- Replies: 1
- Views: 6055
- Fri Jun 23, 2006 11:56 am
- Forum: Late model JD crawler technical support
- Topic: JD 450B Engine Needed
- Replies: 2
- Views: 5526
JD 450B Engine Needed
I am in need of an engine and turbo for a JD450B dozer, mine has threw a rod out the side, and the turbo is junk.
Data tag says 4-219.
Any help for a guy in central Arkansas?
Brian
Data tag says 4-219.
Any help for a guy in central Arkansas?
Brian
- Thu Apr 27, 2006 9:53 pm
- Forum: Late model JD crawler technical support
- Topic: 350C Tracks
- Replies: 4
- Views: 8267
- Thu Apr 27, 2006 9:50 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350B Reverser
- Replies: 2
- Views: 5987
- Thu Apr 27, 2006 9:45 pm
- Forum: Late model JD crawler technical support
- Topic: jd450 clutch
- Replies: 1
- Views: 4764
- Thu Apr 27, 2006 9:26 pm
- Forum: Late model JD crawler technical support
- Topic: 450 problems - gggrrrrrr!
- Replies: 10
- Views: 14453
Your question was on pulling the engine, and if you are going to go through with this here is the way I do it. Drop the belly pans, and the front radiator screen, take the bolts out of the filter mount and remove heavy front nose. Loosen the front pump off and tie it out of the way. Remove the trans...
- Sat Nov 26, 2005 1:08 pm
- Forum: Early model JD crawler technical support
- Topic: Unknown JD Track
- Replies: 1
- Views: 3290
Unknown JD Track
I looked ay a set of tracks that were stated to fit a 350. These traske had 39 pads not 36. I measured the track and the link height is 3.19 and the pins are 23.55.
What do they fit and are they any good.
What do they fit and are they any good.
- Tue Nov 01, 2005 9:39 pm
- Forum: Early model JD crawler technical support
- Topic: 350 Fuel Cap
- Replies: 2
- Views: 4165
350 Fuel Cap
Lavoy,
Do you have a Diesel fuel cap for the straight 350?
I'm waiting on your shipping quote on those tracks.
Brian
Do you have a Diesel fuel cap for the straight 350?
I'm waiting on your shipping quote on those tracks.
Brian
- Mon Oct 03, 2005 3:18 pm
- Forum: Early model JD crawler technical support
- Topic: 350B Clutch?
- Replies: 3
- Views: 5197
350B Clutch?
I got the steering clutches to release but the machine still does not pull. It moves forward some but not at all in reverse. There is a loud squeeling racket when you try to go backwards. It does have the reverser so my question is; Do I need a new clutch and if so, what do I need to watch for when ...
- Sun Oct 02, 2005 10:58 am
- Forum: Early model JD crawler technical support
- Topic: 350 B won't pull
- Replies: 0
- Views: 2675
350 B won't pull
I just picked up my 350 B w/ reverser and the machine does not pull well in either direction. The dozer does move back and forth but will not pull itself onto a trailer forward ar reverse. I'm hoping for something easy :D but I can take any help. Question 2; I don;t think the steering clutches are r...