If you want to keep this real simple with high quality photos and a real reasonable price check out http://www.kodakgallery.com/CalOverview.jsp
everyone could upload their photos to this sight with photo quality and they do all the print work and binding for less than $20/calendar.
just my .02
Search found 16 matches
- Wed Nov 30, 2005 5:42 pm
- Forum: Early model JD crawler technical support
- Topic: Listen up! Interested in a JD crawlers calendar?
- Replies: 17
- Views: 17184
- Tue Nov 29, 2005 5:33 pm
- Forum: Early model JD crawler technical support
- Topic: Listen up! Interested in a JD crawlers calendar?
- Replies: 17
- Views: 17184
- Mon Nov 28, 2005 8:41 pm
- Forum: Early model JD crawler technical support
- Topic: 420c sod pan removal?
- Replies: 1
- Views: 3329
420c sod pan removal?
I am trying to remove the sod pan from my 420c for the first time and I am having a hard time figuring it out. I took out the bolts under the front bumper, The big side bolts (one on each side), the four that bolt to the final drives (two on each side). The front will drop almost a foot and the rear...
- Wed Nov 16, 2005 4:55 pm
- Forum: Early model JD crawler technical support
- Topic: 420c right steering lever is sloppy.
- Replies: 2
- Views: 3892
- Tue Nov 15, 2005 6:05 pm
- Forum: Early model JD crawler technical support
- Topic: 420c right steering lever is sloppy.
- Replies: 2
- Views: 3892
420c right steering lever is sloppy.
The right steering lever on my 420c is sloppy where it goes into the housing causing it to sit at a little different angle than the left one. It steers good but I know something is wrong in there. Any ideas?
- Tue Nov 15, 2005 5:56 pm
- Forum: Early model JD crawler technical support
- Topic: 420c color opinions
- Replies: 3
- Views: 6047
Lowboy if you are looking for an excellent degreaser, pick up a product called "Marine Clean" by the makers of POR15. I could not believe how well it removed the grease and buildup with ease. I mixed it five to one with hot water. The best part is that it doesn't leave any residue that has to be rem...
- Tue Nov 15, 2005 5:51 pm
- Forum: Early model JD crawler technical support
- Topic: Potential 420 Restoration Ques
- Replies: 25
- Views: 24714
I recently had the opportunity to load mine onto a car hauler using a hand come along. It wasn't bad at all. The most important thing was getting lined up straight. to unload I just used a pin bar on each side and put through the holes in the track pads and "walked" it to the ramps. Once it starts m...
- Thu Nov 10, 2005 5:35 pm
- Forum: Early model JD crawler technical support
- Topic: Potential 420 Restoration Ques
- Replies: 25
- Views: 24714
- Wed Nov 09, 2005 4:47 am
- Forum: Early model JD crawler technical support
- Topic: 420c governor worn?
- Replies: 5
- Views: 6433
- Mon Nov 07, 2005 8:13 pm
- Forum: Early model JD crawler technical support
- Topic: 420c governor worn?
- Replies: 5
- Views: 6433
Yes Lavoy The weights are kind of wobbly and the brass thrust washer is worn out. I have decided not to put it back together without rebuilding/replacing the governor. Is there a rebuild kit available from you for this governor? If so I will add it to my list of parts I will be getting from you soon...
- Mon Nov 07, 2005 7:03 pm
- Forum: Early model JD crawler technical support
- Topic: 420c governor worn?
- Replies: 5
- Views: 6433
420c governor worn?
http://216.104.73.215/jdcrawlers/pictures/images/governor.jpg Is the pictured damage something of concern or should it be considered normal? The brass washer that goes between the block and the governor shaft is pretty worn could that be causing the wear on the timing gear and timing gear cover? Th...
- Mon Oct 31, 2005 8:11 pm
- Forum: Show & Tell
- Topic: I hate it when this happens to my 420c
- Replies: 13
- Views: 21320
- Wed Oct 12, 2005 5:34 pm
- Forum: Show & Tell
- Topic: I hate it when this happens to my 420c
- Replies: 13
- Views: 21320
- Thu Oct 06, 2005 7:23 pm
- Forum: Show & Tell
- Topic: I hate it when this happens to my 420c
- Replies: 13
- Views: 21320
- Tue Oct 04, 2005 4:07 pm
- Forum: Show & Tell
- Topic: I hate it when this happens to my 420c
- Replies: 13
- Views: 21320
The fire makes the damage look worse than it is I will be ordering the hood, radiator, hoses, wire harness, seat, etc. to put it back together as I feel it is worth it. Lavoy you are absolutely right as to what happened to it. We let the loggers "borrow" it to get down into the frozen swamp. They mu...