JDcrawlers Messageboard

i pulled the shifter cover off and started it no gears would move when i lifted up on the left pedal the gears started to move so i noticed the right pedal was hitting the floor board i pulled the floor board off and the gears turned and i could get the crawler to move but the left steering is not f...

we pulled the motor back out and checked to make sure the input shaft was in the coupler we made sure it was in when we put the motor back in and started it up and we had the same results tomorrow i will pull the shifter plate off and see if anything moves in side tuns and try to see if the sifter i...

we just bought a 1955 40 c that the motor was stuck and cracked when we pulled the old motor the input shaft came out with it and i put the input shaft back in the coupler and we installed the new motor i just got it running and tried put it in gear to drive it and it would not move forward or backw...