JDcrawlers Messageboard

Ok,guys looking for a 1010 gas radiator and oil cooler pricing for now.The local heroin junkie broke into my garage and stole and scraped the one s I had out of my machine.I've got him in jail (should be under it) but I need some kind of pricing to give the court for restitution.Not likely to ever s...

A lot more bracketry than I thought!I didn't realize it attached to the front trunnion bar also.It IS possible to fab up but would take some time and steel to do it right.For now I'll just keep looking.Theres one somewhere!
Thanks for all your help
Russ

Ran across a mount for a 2010. Any body know if it would fit a 1010?I don't think i've ever seen a 2010.
Russ

This one is off of a 1010 crawler,supposedly.I should be able to check it out this weekend.mine is a straight crawler manual angle ,arm on the outside.1961 I believe,same as me

Hi,ran across a backhoe for a 1010 crawler for sale.Mine doesnt have the mount system for it .Does anybody have one they would part with?Haven't seen the hoe yet ,are there good models and bad models to stay away from?How hard would it be to plumb my crawler?

Thanks for any help!
Russ

I've got a winch for my 1010 , it's the smae one as in my shop manual.Who made these?Was amazed how heavy that thing really is!And what about parts availabity?Dozer not done yet but motor at shop getting hot tanked and crank turned.
Thanks Russ

Becareful where you use the blue , not long term oil resistant.Use the RTV black.Just remember ,blue/water,black/oil.
Russ

I have a winch I got from my neighbor,not sure who made it.It's to heavy to roll over to find out.But what I was wanting to use as a controller is a single lever cutting brake control for a rail buggy.Baisically 2 mastercylinders mounted over top one another with a push / pull handle for each direct...

I hadn't thought about the tracks freezing to the ground, boards are a good idea in the winter. Yeh my dad forgot to dig the tracks out ONCE,when he tried to move it after what I recall as not a very hard freeze,he said his foot slipped off the clutch .Broke BOTH drive axles on the 1010.Lot of what...

Would the 2010 gas take the same as a 1010 gas?If so how much for a complete harness?
Thanks Russ

Just got thinking the other day(no it didn't hurt :)I was working on my old Dodge army truck and got to noticing that everything is vented to the intake after the filter and before the carb.What if we did this on our crawlers to the steering clutch housings??Would this help pull out execess moisture...

Theres also a product from POR 15 that should be very good.If it's anything like por paint,DON'T get it on your hands,you'll have to wear it off.Don't ask me how I know!
Russ

The tool I made consists of a 3/8 plate with 2 hooks that hook over the side of the pad with a guide bushing to hold a drive punch inline with the track pin.Nobody needed to hold the punch,I secure it on the backside of the pad with a big c-clamp.I've used this on my 955 cat with no problems,so I kn...

Just something I did on my 1010 years ago.When I started having rust trouble in the tank,and no time to clean it properly,I stuck a big speaker magenet on the bottom of the tank to help hold some of the rust.Just put it away from the pick ups.Russ

I too have my dads 1010.Thats really a neat old picture,never saw a canopy like it.We are a sentimental group holding on to our old machines and memories. Like I've been told,If I have to explain you would'nt understand anyway. Good luck and keep us posted.Russ