Search found 11 matches
- Tue Sep 22, 2020 2:43 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 logging arch
- Replies: 1
- Views: 1843
JD 350 logging arch
I have a JD350 with logging arch. The upper (horizontal) roller has two deep grooves (maybe 3/16" deep) on the outer edges. Is this a concern? How thick is the drum? Is it solid to the bearing, or is it hollow? Can I keep using it as it is, or is it a disaster waiting to happen? Thanks, : ^ ) Keith
- Fri Sep 14, 2018 8:06 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 350 hood latch
- Replies: 4
- Views: 5858
350 hood latch
I am looking for John Deere 350 crawler hood latch. The machine is a 1967 and no number, but I suspect they were all the same up though the 350 G. I need just one.
- Thu Jul 04, 2013 5:08 pm
- Forum: Late model JD crawler technical support
- Topic: what are 350 rock guards worth?
- Replies: 9
- Views: 10591
- Thu Jul 04, 2013 4:19 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 Rock Deflector broke!
- Replies: 1
- Views: 2702
JD 350 Rock Deflector broke!
The left Rock deflector on my JD 350 broke. I will need a replacement. Does anybody know of a source?
I have all the parts of the last one the broke (just the top part right through the hole) If I can't find a replacement, could it be welded back together?
Thanks
-Keith
I have all the parts of the last one the broke (just the top part right through the hole) If I can't find a replacement, could it be welded back together?
Thanks
-Keith
- Wed Mar 27, 2013 7:21 pm
- Forum: Late model JD crawler technical support
- Topic: what are 350 rock guards worth?
- Replies: 9
- Views: 10591
- Wed Mar 27, 2013 7:19 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 engine shields and muffler needed
- Replies: 1
- Views: 2733
JD 350 engine shields and muffler needed
Hi guys, I have a ca. 1967 JD 350 crawler and I need both engine side panels (or engine shields) and a muffler. Some drug addict stole the two custom made aluminum side panels my Dad made 30 years ago, and because the hood was off (resulting in breaking the muffler) I believe they were going to try ...
- Thu Nov 03, 2011 11:33 pm
- Forum: Late model JD crawler technical support
- Topic: jd226 special tool
- Replies: 0
- Views: 2516
jd226 special tool
Hi-
Where can I get a JD226 track gauge tool?
-Keith
Where can I get a JD226 track gauge tool?
-Keith
- Sat Sep 10, 2011 3:54 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 track bolts
- Replies: 2
- Views: 4001
JD 350 track bolts
What is the bolt size that holds the track plates on for a JD 350 crawler? The parts catalog has part #T-40535 (or T-14612) listed, but it doesn't say what size. Is it a specific JD bolt or can I use any grade 8 bolt? I need to tighten the rock guard and seem to remember that I need to remove the tr...
- Wed Sep 15, 2010 2:55 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: JD 350 inner sprocket sheild broke!
- Replies: 0
- Views: 2120
JD 350 inner sprocket sheild broke!
I have a John Deere 350 crawler and the left inner sprocket shield broke through the center of the top bolt hole. I suppose the front bolt fell out. Can this be repaired? Maybe drilled and threaded with a screw from the top, or welded? Or should I try to find a replacement? Is it held on with only t...
- Thu Jul 23, 2009 5:22 pm
- Forum: Early model JD crawler technical support
- Topic: JD 350 front idler wear
- Replies: 5
- Views: 4772
JD 350 front idler wear
Hi- First time poster... How thick should the "flange" be on the front idler on a John Deere 350 crawler? I know there is a measuring gauge for this... On mine the edges that the track runs along are less than 1/4" and there are chunks broken out. I think they may need to be replaced. How thick shou...
- Thu Jul 23, 2009 5:19 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 front idler replacement?
- Replies: 4
- Views: 5535
JD 350 front idler replacement?
How thick should the "flange" be on the front idler on a John Deere 350 crawler? I know there is a measuring auage for this, but on mine the edges that the track runs along are less than 1/4" and there are chunks broken out. I think they may need to be replaced. How thick should those edges be? -Keith