JDcrawlers Messageboard

I have a JD350 with logging arch. The upper (horizontal) roller has two deep grooves (maybe 3/16" deep) on the outer edges. Is this a concern? How thick is the drum? Is it solid to the bearing, or is it hollow? Can I keep using it as it is, or is it a disaster waiting to happen? Thanks, : ^ ) Keith

I am looking for John Deere 350 crawler hood latch. The machine is a 1967 and no number, but I suspect they were all the same up though the 350 G. I need just one.

Mike-
Do you have a left Rock Deflector?

I need T 15831

-Keith
five-oh-three-663-4040

The left Rock deflector on my JD 350 broke. I will need a replacement. Does anybody know of a source?

I have all the parts of the last one the broke (just the top part right through the hole) If I can't find a replacement, could it be welded back together?

Thanks
-Keith

I think I paid $50-$100 a few years ago. Shipping is a bear!

Hi guys, I have a ca. 1967 JD 350 crawler and I need both engine side panels (or engine shields) and a muffler. Some drug addict stole the two custom made aluminum side panels my Dad made 30 years ago, and because the hood was off (resulting in breaking the muffler) I believe they were going to try ...

Hi-
Where can I get a JD226 track gauge tool?
-Keith

What is the bolt size that holds the track plates on for a JD 350 crawler? The parts catalog has part #T-40535 (or T-14612) listed, but it doesn't say what size. Is it a specific JD bolt or can I use any grade 8 bolt? I need to tighten the rock guard and seem to remember that I need to remove the tr...

I have a John Deere 350 crawler and the left inner sprocket shield broke through the center of the top bolt hole. I suppose the front bolt fell out. Can this be repaired? Maybe drilled and threaded with a screw from the top, or welded? Or should I try to find a replacement? Is it held on with only t...

Hi- First time poster... How thick should the "flange" be on the front idler on a John Deere 350 crawler? I know there is a measuring gauge for this... On mine the edges that the track runs along are less than 1/4" and there are chunks broken out. I think they may need to be replaced. How thick shou...

How thick should the "flange" be on the front idler on a John Deere 350 crawler? I know there is a measuring auage for this, but on mine the edges that the track runs along are less than 1/4" and there are chunks broken out. I think they may need to be replaced. How thick should those edges be? -Keith