They're here, I will post as I get time.
Lavoy
Search found 10813 matches
- Wed Mar 21, 2007 9:39 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: More new parts coming soon!
- Replies: 1
- Views: 3060
- Wed Mar 21, 2007 9:38 pm
- Forum: Show & Tell
- Topic: UPDATE JD 64 Tilt Cylinder Rebuild Completed
- Replies: 5
- Views: 7574
If you get enough dirt and crud, or a rock down in the area surrounding the tilt cylinder, it can crush the barrel when the dozer tilts. If you look at the 6 way on a 1010 or 2010, they have a large sheet of steel that is above the cylinder to keep crud that rolls over the top of the moldboard from ...
- Wed Mar 21, 2007 9:35 pm
- Forum: Early model JD crawler technical support
- Topic: Replacing Master Pin on 2010
- Replies: 14
- Views: 11910
If you have the track over the front idler, and the split is between there and the sprocket there is another trick. Put a block between the loader bucket and the front idler, and then curl the bucket down and use it to compress the track spring. This should give you enough room to put the pin in. La...
- Mon Mar 19, 2007 8:59 am
- Forum: Late model JD crawler technical support
- Topic: Need some help on figuring out a serial number.
- Replies: 9
- Views: 11180
- Sun Mar 18, 2007 10:29 pm
- Forum: Early model JD crawler technical support
- Topic: Sprocket rings for 2010
- Replies: 5
- Views: 4717
There are a few anomilies with the 2010. If you look at the finals, they are rotated to the rear slightly, Deere never did that on any other crawler before or after. The larger diameter inward dished sprocket was another. Could just be growing pains associated with making a larger crawler than they ...
- Sun Mar 18, 2007 10:27 pm
- Forum: Early model JD crawler technical support
- Topic: 420C oil Pressure Low HELP!!!!!!
- Replies: 1
- Views: 2876
- Sun Mar 18, 2007 11:47 am
- Forum: Late model JD crawler technical support
- Topic: Need some help on figuring out a serial number.
- Replies: 9
- Views: 11180
- Sun Mar 18, 2007 11:45 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 2010 Sprockets
- Replies: 5
- Views: 5799
- Sun Mar 18, 2007 11:44 am
- Forum: Early model JD crawler technical support
- Topic: JD 50 and 51 backhoe
- Replies: 1
- Views: 2751
Even with a blade on, you will need to hang counterweight on the front of the tractor to keep the front end on the ground. A local guy had one, and he had hug a couple hundred pounds under the front axle to try and hold it down, and this tractor had a loader on it. The main reason though is the hoe ...
- Sun Mar 18, 2007 11:41 am
- Forum: Early model JD crawler technical support
- Topic: Sprocket rings for 2010
- Replies: 5
- Views: 4717
Until proven wrong, I will say there are not weld on rims for 2010 sprockets. What guys are thinking of are the weld on 350 rims and they fail to understand that the 2010 uses a substantially larger diameter sprocket. That being said, if they will return your money if they don't fit, try it just for...
- Fri Mar 16, 2007 10:18 am
- Forum: Show & Tell
- Topic: IRONYETTY'S 440 IC TOY
- Replies: 6
- Views: 8016
I would have to find my book to be sure, but about 9,250lbs pull, first wrap, full throttle. That is about what the book says, in my experience, it will drag a 5 roller 420 with a 62 blade across the yard with the engine idling and about 6 wraps of cable on it with the blade down, and the tracks loc...
- Fri Mar 16, 2007 7:48 am
- Forum: Show & Tell
- Topic: IRONYETTY'S 440 IC TOY
- Replies: 6
- Views: 8016
- Thu Mar 15, 2007 4:04 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New skid shoes for 62, 63, 64, 602 blade coming soon
- Replies: 1
- Views: 3003
New skid shoes for 62, 63, 64, 602 blade coming soon
Coming soon, new reproduction skid shoes for 62, 63, 64, 602 and numerous other blades for 40-450. I have all the pieces cut, and will be assembling this week.
Lavoy
Lavoy
- Thu Mar 15, 2007 4:03 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: More new parts coming soon!
- Replies: 1
- Views: 3060
More new parts coming soon!
Should have some more new parts in next week.
New master shields
New PTO's
New dash lights
New muffler clamps
New 430 manifolds
and more.
Lavoy
New master shields
New PTO's
New dash lights
New muffler clamps
New 430 manifolds
and more.
Lavoy
- Thu Mar 15, 2007 1:15 pm
- Forum: Show & Tell
- Topic: 1010CA Rebuild Project Part VIII
- Replies: 10
- Views: 11580