JDcrawlers Messageboard

I think they quote me at least $8000 and that was many years ago.
Lavoy

They do not appear in the straight 350 parts book, but that is not to say that there was not a bulletin issued later on how to install them.
Lavoy

I just got the brake rods for 1010 done as well.
Lavoy

I should have one, I can check.
Lavoy

The gear was not listed as a replacement part, you had to order the whole unit. Unfortunately it is obsolete, so only availalbe will be used.
Lavoy

Depends on the brand of clutch, but normally you pull the top 4 bolt plate off of the clutch, and there is a way to adjust it in there, been too many years since I did it.
Lavoy

Could be out of adjustement, but more likely the clutch is stuck.
Send me an e-mail, I found that part you were looking for.
Lavoy

I just found a pic of the 227 gauge in teh 2010 servicemanual. Not sure if it is the updated one or not, but the one in the pic definitely does not mirror the JD7 on the back side. According to the service manual, one side of the gauge does engine and steering on the 2010 crawler.
Lavoy

Bill,
I don't remember off the top of my head, but I wonder if it is for 2010 clutches. EIther that or it already mirrors the JD7 gauge. When I get one, I will compare it to a JD7 gauge, then we will know for sure.
Lavoy

Bill,
You can't, the new 227 gauge already has tabs on the other side.
Lavoy

As soon as they are done, I will post in the shop of Deere's.
lavoy

Bill,
The new sub number gauge is still available, all of a hundred dollar bill. I am supposed to have one coming that is being loaned to me for patterning, but nothing as of right now.
Lavoy

There was aftermarket loader or two, but an MC is just not stable enough to handle a loader, and the undercarraige will not tolerate for long either. If you want a loader crawler, get at least a 40, and 5 roller only.
Lavoy

I am working on repros, can't give you a definite date, but I am woking on it.
Lavoy

I use Mobil 80W-140 SHC synthetic in all of mine, but plain old 80W-90 will be just fine.
Lavoy