JDcrawlers Messageboard

I should have them on hand.
Lavoy

Happy Thanksgiving to you and yours.
Lavoy

Crawler pumps are R & R only, there are no new ones that I have ever found.
Lavoy

Drain both final drives and the transmission as far as rolling. I would pretty seriously look at reverser just because.
Lavoy

Keep it weasel pissed up as you are doing it. If it will go in, then it should come out, might have to work it back and forth a few times.
Lavoy

Can you drive the shaft in slighlty to break the rust maybe? Air hammer, a big one really helps for this kind of stuff.
Lavoy

#1000 tool carrier, you will see #61 blades on them, but really poor application, hard on undercarriage, and a host of jobber blades.
Lavoy

Headlight brackets, can't use them on loaders, take them off.
Lavoy

I got in a 420C with #90 loader either for parts or whole. Ran and drove when I picked it up, stored inside since. Call for more info.
Lavoy

Just in for parts, 3 roller 40, no hydraulics or blade, excellent undercarriage, good sheetmetal and fenders.
Lavoy

Just in for parts, 440ICD, excellent running engine, virtually new 350 rails, pads, and rerimmed sprockets. 63 dozer blade, deluxe seat. Track frames and rollers are sold.
Lavoy

Only way to know interchangeability is to use part numbers. I would never guess how long a given part was used throughout the series.
Lavoy

All 40 track pads are the same regardless of serial number.
Lavoy

No problem.
Lavoy

10, 12, and 14" of various types. Parts manual shows them all.
Lavoy