Search found 9135 matches

by Lavoy
Fri Jun 15, 2018 8:28 pm
Forum: Show & Tell
Topic: New Member
Replies: 2
Views: 84

Re: New Member

Go ahead and post it.
Lavoy
by Lavoy
Wed Jun 13, 2018 8:35 pm
Forum: Late model JD crawler technical support
Topic: Hydraulic control valve on 450 C
Replies: 2
Views: 123

Re: Hydraulic control valve on 450 C

Float lock may be damaged or removed by someone that doesn't want it.
Lavoy
by Lavoy
Wed Jun 13, 2018 8:34 pm
Forum: Late model JD crawler technical support
Topic: JD 450 stuck final drive shaft.. Ideas. New member, Thx
Replies: 5
Views: 138

Re: JD 450 stuck final drive shaft.. Ideas. New member, Thx

Even vibrating on the drum with steady outward pressure on the shaft might do it.
Lavoy
by Lavoy
Wed Jun 13, 2018 4:22 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Parts listings
Replies: 1
Views: 15068

Re: Parts listings

Just a bump to an old topic.
Keep in mind that inventory changes, and over time I get some different stuff in. Too much stuff to list, contact me with questions.
Lavoy
by Lavoy
Wed Jun 13, 2018 4:18 pm
Forum: Late model JD crawler technical support
Topic: JD 450 stuck final drive shaft.. Ideas. New member, Thx
Replies: 5
Views: 138

Re: JD 450 stuck final drive shaft.. Ideas. New member, Thx

Any air hammer will do pretty much the same thing at a lot less money.
Lavoy
by Lavoy
Wed Jun 13, 2018 4:17 pm
Forum: Late model JD crawler technical support
Topic: 450C tracks & 6 way blade
Replies: 2
Views: 102

Re: 450C tracks & 6 way blade

Not positive, but kind of doubt it.
Lavoy
by Lavoy
Wed Jun 13, 2018 9:16 am
Forum: Late model JD crawler technical support
Topic: JD 450 stuck final drive shaft.. Ideas. New member, Thx
Replies: 5
Views: 138

Re: JD 450 stuck final drive shaft.. Ideas. New member, Thx

Assuming rust then. Weasel piss and vibration, heat if you can get to it.
Lavoy
by Lavoy
Tue Jun 12, 2018 8:08 am
Forum: Late model JD crawler technical support
Topic: 350 B brake band
Replies: 37
Views: 897

Re: 350 B brake band

We have a place called Fleet Farm here, and they stock a lot of the correct oil, meets the J20 Deere specs, that is what I use. If not, just buy the actual HyGard from Deere. You can also get correct equivalents for an oil jobber too. Mobil equivalent used to be 423, then 424, but have not bought an...
by Lavoy
Mon Jun 11, 2018 1:34 pm
Forum: Show & Tell
Topic: dozers = 1010 c diesel + mc ..
Replies: 2
Views: 97

Re: dozers = 1010 c diesel + mc ..

Couple other thoughts.
The MC is a 1952, doesn't affect value, but at least you have the correct year.
The 4320 is at least somewhat collectable with the HFWA. Substantially down from a few years ago, but still should command a premium vs a standard front.
Lavoy
by Lavoy
Mon Jun 11, 2018 1:22 pm
Forum: Show & Tell
Topic: dozers = 1010 c diesel + mc ..
Replies: 2
Views: 97

Re: dozers = 1010 c diesel + mc ..

Pics only tell part of the story. They both look like pretty good old girls, but do they run and drive, recent work, undercarriage, clutches stuck from sitting, etc. I am loathe to ever give values, because if I give people my honest opinion for example in a range of $5-$100,000, the only figure the...
by Lavoy
Mon Jun 11, 2018 1:15 pm
Forum: Early model JD crawler technical support
Topic: 440 Options
Replies: 2
Views: 121

Re: 440 Options

Got a gas one sitting in the shed as you describe, and a diesel sitting next to it without a 3PT, but 3PT was a dealer or field installed option. 6 way is a little more scarce than the other blades, but you do see them. Hyd tensioners also were an option, but could or can be field installed.
Lavoy
by Lavoy
Mon Jun 11, 2018 9:16 am
Forum: Lavoy's Little Shop O' Deeres
Topic: 450 clutch gauges back in stock
Replies: 0
Views: 43

450 clutch gauges back in stock

Finally got them back in stock, clutch gauge for 450, 450B, $50 + freight.
Thanks,
Lavoy
by Lavoy
Mon Jun 11, 2018 8:09 am
Forum: Early model JD crawler technical support
Topic: Track tension bolts
Replies: 4
Views: 176

Re: Track tension bolts

I have new seals in stock. One thing I have had to do in the past is have a machine shop thread 1" shaft the same lengths as the original bolt. Thread one end only a deep as a nut, weld it on, and sand the end off, and it looks so close to original that you can't tell. Only thing I don't like is the...
by Lavoy
Sun Jun 10, 2018 7:41 pm
Forum: Late model JD crawler technical support
Topic: 450B transmission
Replies: 9
Views: 159

Re: 450B transmission

Are you looking at/for Deere manuals?
Lavoy
by Lavoy
Sun Jun 10, 2018 7:39 pm
Forum: Late model JD crawler technical support
Topic: 350 B brake band
Replies: 37
Views: 897

Re: 350 B brake band

5" would be a lot.
I doubt it says hyd oil, it might say 303 which is a transhydraulic/multitrans/common systems fluid. Hyd oil is for hyd only, the other stuff is for both so to speak
Synthetic gear lube will not hurt anything, not any cheaper than getting Hygard or equivalent.
Lavoy