Search found 53 matches

by millertym2
Sun Jan 29, 2012 3:20 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: clutch part
Replies: 1
Views: 2825

clutch part

Hi Lavoy, Do you have a carrier bearing sleeve? Part # M 217 T (sub for AM644T) Or at least the measurements of one and I can have one made.
Thank you,
Carl.
by millertym2
Sun Dec 18, 2011 3:11 pm
Forum: Early model JD crawler technical support
Topic: mc steering clutchs froze up
Replies: 2
Views: 3488

mc steering clutchs froze up

Is there any trick to freeing up my steering clutchs on my MC? It has been sitting a while.
by millertym2
Sun Dec 05, 2010 8:13 am
Forum: Early model JD crawler technical support
Topic: air filter for mc
Replies: 4
Views: 4586

Im thinking I will end up making the same type of thing. Or even go simple and find a motorcycle air filter and glue it to the rubber hose that goes to the carb. I will post any pics if I find somthing that works. Thanks Guys!
by millertym2
Thu Dec 02, 2010 6:17 pm
Forum: Early model JD crawler technical support
Topic: air filter for mc
Replies: 4
Views: 4586

air filter for mc

Does any one know what aftermarket air filter would fit on a MC? I still have the oil bath filter but want to run a regular air filter to use for everyday use.
by millertym2
Mon Sep 06, 2010 8:04 am
Forum: Lavoy's Little Shop O' Deeres
Topic: mc steering handles
Replies: 2
Views: 3336

Thanks Lavoy I will call you tomorrow.
by millertym2
Mon Sep 06, 2010 7:48 am
Forum: Lavoy's Little Shop O' Deeres
Topic: mc steering handles
Replies: 2
Views: 3336

mc steering handles

does anyone know where to buy the black steering handle that screw on the steering levers for an MC? Lavoy you probably have a 5 gallon pale full of them. If so how much?
by millertym2
Mon Jun 21, 2010 12:06 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: mc roller parts.
Replies: 1
Views: 2734

mc roller parts.

I need the inside cups/cones for the rollers on my MC. Are new inside"sleeve/rollers" available? Or do you have any in good shape Lavoy? I need all 3 inside cups.
by millertym2
Tue Feb 26, 2008 8:59 pm
Forum: Show & Tell
Topic: Oh BOY, do I need one of these!!!!!!!!!!!!!!!!
Replies: 22
Views: 26041

gotta have one

Lavoy what is that called? Is there a number or a letter for it? Its like a new MC. I love it!!
by millertym2
Wed Sep 05, 2007 7:31 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: mc parts
Replies: 1
Views: 3261

mc parts

Lavoy,Do you have a rocker arm shaft and push rod for a 52 mc? If you do how much? Thanks,Carl.
by millertym2
Sat Mar 10, 2007 7:22 am
Forum: Early model JD crawler technical support
Topic: engine troubles
Replies: 3
Views: 4772

Lavoy,

I am going to put new bearings,rings and all new seals.I have the head off and need seals a gasket kit for that too.So probably the biggest rebuild kit there is. If you want I will give you a call.

Thanks,millertym2.
by millertym2
Wed Mar 07, 2007 7:52 am
Forum: Early model JD crawler technical support
Topic: engine troubles
Replies: 3
Views: 4772

engine troubles

Two weeks ago I was pushing our 6 foot snow banks back and with 10 feet left to go my mc popped and would only run on 1 cyl. and barely made it back to the garage. Come to find out the rocker arm shaft broke at front rocker. And both cyl's had under 30 psi of comp. I have known the rings were shot b...
by millertym2
Mon Oct 09, 2006 12:35 pm
Forum: Early model JD crawler technical support
Topic: electronic ignition
Replies: 4
Views: 4907

didnt know that they had a elctronic ign. for them.Where did you get it?
by millertym2
Fri Apr 07, 2006 4:41 pm
Forum: Early model JD crawler technical support
Topic: repairs in a pinch
Replies: 1
Views: 3282

repairs in a pinch

Hi all. I have been fixing up my mc for a while now. I started on the left side to get the steering working.I only put in new fiber clutch's (from Lavoy)and reused the original pressure plate. And that worked fine-SO I went on to the right side and tore into it.That side was heavily rusted so I inst...
by millertym2
Tue Mar 28, 2006 6:30 pm
Forum: Early model JD crawler technical support
Topic: pressure plate adjustment
Replies: 1
Views: 2930

help!!

Has anybody adjusted the pressure plate on a mc? I took the final off tonight and turned the adjustment bolts out,that should put more pressure on the clutch's. But I got called back home before I could put her back together.

Any help is appreciated.
thanks,millertym2.
by millertym2
Sun Mar 26, 2006 9:19 pm
Forum: Early model JD crawler technical support
Topic: pressure plate adjustment
Replies: 1
Views: 2930

pressure plate adjustment

Lavoy, Can I adjust the pressure plate on my MC? And (if I can)which way do I turn the bolts?In or out? I have new clutch's But I reused my original plate.(I know I broke the first rule of crawlers,dont reuse old parts) It was working fine untill I pushed a little too hard on a stump and she started...