JDcrawlers Messageboard

I decided to scrap the bailer. I kept the 4cyl hercules engine and the very impresive flywheel.

Walt

I just recently aquired a international 50 hay bailer its in sad shape. but it is all there. Im sure there are many good parts someone is looking for .I cant really find any info on it. I tore up some of the tin work in the process of retreiveing it from a woods then crossing a stream .Thankfully my...

thanks for the info guys . I will contact Travis asap

Anyone know where I can get a decal set for a 420 with 90 loader . Mine is industrial yellow so I need black decals . Walt

thanks Lavoy for the info. I did as you said and disconected both hoses and then took the pin out. and lifted the cylinder up and back giving me enough room to replace both hoses. I am taking your advice and replacing both hoses on the other side also.

thanks Walt

Ive blown the hose that lifts the bucket up and down on a 90 loader ,on the long cylinder. and with the bucket now in the down position the hose end that attatches to the cylinder is virtually impossible to get at . My question is should I fill the hydrolic fluid up then raise the loader up.and quic...

my vote is yellow.especially since its the color your dad liked enough to repaint it yellow. if you had no past history with this crawler. then i would say green. all that being said green or yellow it will look good.so put me in for one vote yellow. my .02 Walt

ok i finally got the covers off. when i move the right steering lever i have about an inch of free play in the throw out bearing.indicating to me that the cluch is rusted in position and wont release. i tried pushing against a large dirt pile while trying the right clutch in hopes it would break loo...

my crawler has the long skinny reverser handle on the right side.

Walt

that figures . i just had the crawler split a month ago. from now untill spring its only going to plow snow.and i will use reverse gear instead of the reverser. untill i get a chance to split the tractor again., bummer. walt:(

thanks for the replies.i dont know what type reverser i have. my crawler is a 420 serial# 105xxx. I will check /replace the fluid asap.walt

is it normal for the reverser to be noisy / grumbly. it works ok and this may be normal, but it is noticably more noisy in reverse useing the reverser than useing reverse gear.anyone with a crawler with reverser please let me know if yours is similar.or not

thanks Walt

i will pull the covers off monday.and see what i have


walt

hi guys This is my first post so no pics yet . I have a 57 420 5 roller with 90 loader and when I bought it it was in terrible shape.mechanically and cosmetically. The motor was stuck like nothing i've ever seen before and ive rebuilt many motors .I have completely rebuilt the motor . and rebuilt th...