JDcrawlers Messageboard

Need the screw in under tank, glass sediment bowl and fuel shut off petcock. Waiting for LaVoy to get me a carb kit for the MS too. Parts anyone?

ahhh..... Once again, thank you Lavoy ! So, do you have some "X" pads to sell me? 6" x 12 ", 2 bolt pattern

A few pics i managed to get on up. Good picture of pads and crawler. The White tail deer are in my front yard, so no, i dont hunt them. Do your pads have ware like these? I guess i am still intrested? I need two that are broke fixed and a few to spare seems in order. 2 Bolt pattern !!! http://picasa...

That would be awesome ! The shipping might be a killer tho? I wonder if i should at least inquire to the dealer? They might have a lead?
See if they are available and rough weight per pad for shipping purposes.

I have pictures of the pads with alternating grousers that were stock. One replacement pad on it was a bit different on the grouser and had to be torched down. (before i got it) What the best economical way to get a few pads with bolts and nuts for it? I don't know of a parts one around here, and ha...

You guys are super ! I will follow the exact order of adjustment after i pull it off and clean it up a bit(and check screens and lines ect.) I bet it will snap right out of it with some attention. Why the mixed opinion on the carb "kits"? If that throttle linkage is included and a seal for it includ...

All such great useful info guys. I hope that by cleaning things up it will solvea bunch. But i do know that after 40 years of wear, that shaft entering thru the carb HAS to be creating an air leak. I always seem leary of "kits", but if it would solve things, i would be on it. I will get an exact mod...

if the throttle shaft as it enters the carb is worn, then what?

Sputtering and won't pull under a load. Surges some at an idle. Wants to run somewhat better with the choke on. Will sometimes just stall. It is suppose to have a new needle in it. I was told the linkage going into the carb may be sucking air. What else can i do to doctor this one up? One this machi...

Tiny Crawler on this message board sent me a Ciontrol valve which bolted in and worked ! What a guy!! He packaged it up and i sent eenough to cover pstage and thats it! Thank you Tiny again !
Now to get this carb to work right.............

The wood products run deep in my Scandinavian blood. I even stack log homes, as it was my job for nearly 20 years. Now its all about play'in for profit!

*smiles EARTH FIRST !!

(we'll log the other planets later!)

So you all know, Tiny here has helped me TONS !! He has some great experience and most of all a huge heart. He was willing to box up a control valve and send me for shipping charges alone. Why i am still not out of the woods yet, i am close. Thank you to Ken P. for his perfect explaination of what t...

Tiny, wow, awesome ! Mitch was the engineer at the hyd shop who's email i printed. My name is Toby. I think you are my hero ! The spool and section of the cessne contol valve with the problems is the MIDDLE ONE, or the FORK LEVER (spool) I may totaly need that !! I will pay you for it and some shipp...

Dead nuts on Ken. I asked from the get-go why they did not repair the issue at hand when i brought the valve into them. I will do as you say. If i can repair the spool in there i am gold. If not, it is a sectional valve and i can MAYBE find a section to throw in? Or, i put a whole new "quad" type va...