I have (3) 2010 crawler hoes and engine plus parts, northeast PA 570-689-9305
Where are you located, and have you resolved some of your issues. Gerald
Search found 35 matches
- Thu Mar 28, 2019 8:37 am
- Forum: Early model JD crawler technical support
- Topic: 2010C, newbie to crawlers.
- Replies: 30
- Views: 21295
- Wed Mar 27, 2019 7:32 pm
- Forum: Early model JD crawler technical support
- Topic: 2010C, newbie to crawlers.
- Replies: 30
- Views: 21295
Re: 2010C, newbie to crawlers.
My name Gerald with three 2010's , engine and engine parts for sale !! Location northeast PA 570-689-9305
Where is your location? May or may not be able to help..
Where is your location? May or may not be able to help..
- Wed Mar 14, 2018 12:05 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 parts wanted
- Replies: 8
- Views: 9008
Re: 2010 parts wanted
Doing fine, getting older, more couch time. Especially during the winter
- Tue Mar 13, 2018 1:40 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 parts wanted
- Replies: 8
- Views: 9008
Re: 2010 parts wanted
I have three 2010 crawlers hoes. One of which is for parts, I do not know if this parts machine will help you.. Right now we are in snow country..
- Fri Feb 12, 2016 12:39 pm
- Forum: Off-topic discussions
- Topic: Gathering of the Green anyone
- Replies: 7
- Views: 6350
Gathering of the Green anyone
Gathering of the Green, Who's going and is it worth while? Gerald
- Sun May 18, 2014 2:51 pm
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
Not finished but I am getting (indication of) results. I will try to answer all questions/statements and leave our conversation complete.. This is my first power steering learning maintenance,, so much could be added.. Our question of control valve (spool valve) movement (forward and aft) activated ...
- Wed May 14, 2014 7:53 pm
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
Sorry I did not notice your flow control valve open closed position question prior to posting my more info ramble.. The flow control valve is were the pressure hose attaches coming from the pump. Used to maintain some pressure (adjusted to 130 psi at fast idle) WHEN THE CONTROL VALVE IS IN THE NEUTR...
- Wed May 14, 2014 7:11 pm
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
More info, I removed pressure gauge and installed a shut valve with garden hose attached..Eng running pump is recirculating nearly 4gallons per minute.. Put the end of the garden hose in reservoir fill port and continued to run the eng. no air or foaming, solid flow for about 5 minutes. I have concl...
- Wed May 14, 2014 2:17 pm
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
Well last week I "tee'd" into the pressure hose at the control valve and had flow from a garden hose (brother saw it). Now I "tee'd in with a gauge" and no indication of pressure at a fast idle. first gauge increment is 25 psi, should be a minimum of 130 psi with a closed flow control valve. If this...
- Wed May 14, 2014 11:42 am
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
Yes last week I tied into the pressure hose fitting at the flow control valve to determine fluid flow (so as to make sure I would not be damaging the pump) I did have good flow, however I did not install a pressure gauge. Might be one of my next steps..This morning I took the screw cap (cover) off t...
- Wed May 14, 2014 5:34 am
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
Thank you for responding..not sure that I should continue this link because time for others is precious.. Yes this servicing and bleeding process has been going on for about 3 weeks, while parked in the extreme turned position and held with a rope on the steering burbing air amounted to about a cup ...
- Tue May 13, 2014 3:56 pm
- Forum: Off-topic discussions
- Topic: JD60 2 cyl power steering
- Replies: 10
- Views: 9096
JD60 2 cyl power steering
Help desired JD60 power steering doesnot come back to life. Iam addressing issues with this tractor, currently installing new radiator. To accomplish front (grill) and top fairings removed to include the fuel tank. Steering wheel and shaft removed.. With pressure hose, left and right turn pressure t...
- Wed Dec 07, 2011 10:24 am
- Forum: Early model JD crawler technical support
- Topic: Oil pressure goes down when engine warms up... 2010 diesel
- Replies: 19
- Views: 19285
Loss of oil pressure with 2010 series engines
Only stating my expeirenence and often to busy for dialouge. I had three engines apart and here goes. Since you have the oil pan off, measure #1 rod bearing, you will find it worn about .008.. Put it back together for now, remove the valve cover and inspect the CORK end plugs in both ends of the val...
- Sun Sep 18, 2011 5:18 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 no oil to rocker shaft
- Replies: 6
- Views: 5470
2010 valve rocker shaft lubrication
As directed in service manual SM2037 ch 40 sec 10 pg 6 CAUTION statment the rear shaft hold down stud (bolt) must be oriented correctly. Page 1 of this section describes oil passage with the flat FLAT oriented correctly..I think the flat is toward the right rear corner of the head linning up with th...
- Thu Sep 01, 2011 6:10 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 diesel missing engine clutch parts
- Replies: 2
- Views: 3326
2010 parts
I have extra clutch operating parts for the same reason you spoke f,purchased a crawler with those parts missing, even though the had them availble from a parts crawler. I am 2hrs from the crawler(s) and parts book, so will try to name the parts genericly with out part numbers. NOS lever arm that at...