JDcrawlers Messageboard

have one as well that i need to get working on. Stay in touch...we can compare notes . That PDF is a good start that Paul has

Jeff

Temps here have been in the Teens ..single digits. It sets for about a week. No block heater or hose heater of any kind, and she pops off even with no choke about one turn of the starter. Just have really impressed so far. Can't wait till this summer and see what it can do with the dirt and rock. Al...

trailer was built for my Polaris 600 to haul wood. But with as much snow as we have now, ain't no way to get it up there now. Trailer is good for about a weeks worth of burnin, and maybe alittle underkill for the dozer...but it works great

Been kinda quiet in the phot section lately... here's what we been up too.
Thanks Lavoy for all your help, knowledge and parts...she runs like a swiss watch.

Does the track on the right look alittle loose to you?

Jeff

Had to replace the bull gear recently...thanks Lavoy. After looking around at a few bull gears tooth count..55 and 56, and was wondering how they are put on? I have my old one at 55 with a cracked center hub and was wondering if i should keep it around just in case. Is it posible if one can not loca...

Are those 2 holes in the bottom of the spider tapped and used to push against the drum to remove the spider from the center hub?

I kept working on them Lavoy and they finally came loose. Thanks I got the actuator off today and... that pin gave in on me today. Thanks Paul. Didn't know it had to come out from the spool side. Anybody hear of this Gibbs penatrating oil before?...... so far so good. Them brake retainer discs are a...

Any ideas on how that tube rod come apart off the break band? manual was very vague on it shall we say? 2nd to the last picture for those following along on the right had side

Thanks
Jeff

Back to the adapter plate... got the PTO shaft and bearing and oil seal[/img]

uck...now what?[/img]

Attempting to remove the Brake side Cover after soaking in pentatrating spray for a day and some light taping in selective areas with a hammer[/img]

yeah, I don't have access to a cherry picker..."YET" think there one in the future...(Christmas) from me, But is at the moment on a pallet in my garage now thanks to a couple of friends.

Now the other side. All the cover bolts were snapped off except 1. The 2 you see are the jacking holes after they were cleaned out with a 3/8ths tap. [/img]