Search found 56 matches

by D.Light
Wed Jun 07, 2017 3:08 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Need a T32823 for 350B Loader (Lower Boom to Frame Link)
Replies: 0
Views: 2626

Need a T32823 for 350B Loader (Lower Boom to Frame Link)

I need the subject part. The lower link on the Boom to frame linkage. (Bottom link on the triangle plate of the loader that attaches back to the main frame) Cast iron piece with about 18" long with holes on each end for the pins to attach. Call me if you think you may have one or need more info 423 ...
by D.Light
Sun Jul 12, 2015 7:55 pm
Forum: Late model JD crawler technical support
Topic: JD 350B Loader Rough Vibration in Reverse Only
Replies: 8
Views: 8201

Update

The Loader is back together now and running good. There does not seem to be any dragging or vibration after replacing the brake band. The band was a rebuilt band and some of the brake shoe material had came apart. Not sure which came first the brake dragging or the failed brake band. Thanks for the ...
by D.Light
Sat May 30, 2015 9:07 pm
Forum: Late model JD crawler technical support
Topic: 350B Brake Band Anchor T21317 Broken
Replies: 1
Views: 2717

Answer

I answered my own question tonight... I don't think there is any way that the brake band anchor could possibly be removed with the final drive installed. In fact, Houdini himself would probably have problems removing the anchor WITH the final removed! I think I have recovered from this mishap. After...
by D.Light
Fri May 29, 2015 8:43 pm
Forum: Late model JD crawler technical support
Topic: JD 350B Loader Rough Vibration in Reverse Only
Replies: 8
Views: 8201

Don't do this...

While trying to identify the source of the vibration today, I noticed the brake band anchor nut was loose. So, I tightened it real good... too good and the stud broke off. Now to try to find a T21317 anchor and replace it..... On the positive side -- I'm hopeful the brake band was the source of the ...
by D.Light
Fri May 29, 2015 5:38 pm
Forum: Late model JD crawler technical support
Topic: 350B Brake Band Anchor T21317 Broken
Replies: 1
Views: 2717

350B Brake Band Anchor T21317 Broken

The Dilemma - While working on another problem today, I noticed the brake band anchor T21317 nut was loose. I thought it needed to be pretty tight, but much to my surprise the bolt appears to be some sort of cast and broke off. My questions: 1) Can this anchor possibly be replaced from the top side ...
by D.Light
Wed May 13, 2015 9:12 am
Forum: Late model JD crawler technical support
Topic: JD 350B Loader Rough Vibration in Reverse Only
Replies: 8
Views: 8201

Thanks

Thanks Terry. I'll check it out.
by D.Light
Mon May 11, 2015 9:32 am
Forum: Late model JD crawler technical support
Topic: JD 350B Loader Rough Vibration in Reverse Only
Replies: 8
Views: 8201

Thanks Terry

Is the Final Pinion Bearing a common problem and I assume it is repairable by removing the Pinion Bearing Housing Cap?

Would the Final Pinion make a louder noise in Reverse as opposed to Forward?

I really appreciate the feedback.
by D.Light
Sat May 09, 2015 12:46 pm
Forum: Late model JD crawler technical support
Topic: JD 350B Loader Rough Vibration in Reverse Only
Replies: 8
Views: 8201

JD 350B Loader Rough Vibration in Reverse Only

Today while running the 350B Loader, I noticed a rough vibration or grinding noise ONLY while moving in the reverse direction. I fear it is a transmission problem, but I'm hopeful some of you guys have experienced this and have alternative suggestions. I guess it could be a final drive or a binding ...
by D.Light
Fri Oct 17, 2014 7:55 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: 350B Parts needed
Replies: 2
Views: 4069

I Still need a 350B (Right) Front IdlerAT31141 or T32062

I Still need a 350B (Right) Front IdlerAT31141 or T32062. I have fixed the boom arm. It was not too bad, just cleaned it up a bit and welded it back. The weld had broken on the pin.
by D.Light
Mon Jan 27, 2014 10:12 am
Forum: Lavoy's Little Shop O' Deeres
Topic: 350B Parts needed
Replies: 2
Views: 4069

350B Parts needed

I need a (Right) Front IdlerAT31141 or T32062 and I also need a AT32045, Left Inner Boom Lever Arm. My lever arm has a broken pin on the center pin. Does anyone have any experience repairing one of these broken Pins? I would also take any suggestions on welding/repairing damaged front idler as noted...
by D.Light
Sun May 12, 2013 9:51 pm
Forum: Late model JD crawler technical support
Topic: 350B Reverser Leak
Replies: 14
Views: 14544

Reverser is still losing some fluid. I have replaced the rear seal while rebuilding the transmission. :(
by D.Light
Sun May 12, 2013 9:45 pm
Forum: Late model JD crawler technical support
Topic: clutch and torsoinal isolator between engine/flywheel 350B
Replies: 20
Views: 20564

Transmission Verdict

I thought I would follow up on this older post. I decided to take the ole 350B to Ace Equipment Repair & Welding. 5973 Kingsport Hwy, Johnson City, TN 37615. (423) 434-0008 for the repair. I sure am glad I took this machine to a shop for this repair. I did not have access to a shop with a lift or ho...
by D.Light
Mon Nov 19, 2012 4:40 pm
Forum: Late model JD crawler technical support
Topic: 350B Steering Clutch Pressure Plate Tension Adjustment
Replies: 1
Views: 3058

350B Steering Clutch Pressure Plate Tension Adjustment

Can the 350B Steering Clutch Pressure Plate Tension be adjusted (Increased) while in the machine?

I know it won't be easy if it is possible...

If so, I would appreciate any hints.

Thanks,

D.Light
by D.Light
Mon Sep 03, 2012 8:30 pm
Forum: Late model JD crawler technical support
Topic: clutch and torsoinal isolator between engine/flywheel 350B
Replies: 20
Views: 20564

Special tools required?

OK - I have the 350B out of the woods now. I am contemplating tackling the transmission removal and repair myself as opposed to taking it to a shop and spending $$$$ on the labor. I realize this job requires a lot of hard manual labor, but I am curious if I will need any special pullers, etc. Lookin...
by D.Light
Sun Aug 19, 2012 8:27 pm
Forum: Late model JD crawler technical support
Topic: Looking for shops/mechanics/parts NE.Tennessee / SW VA / NC
Replies: 1
Views: 2660

Any Shop/Mechanic Suggestions?

I am still interested in suggestions for mechanics and/or shops in East Tennessee.

Please post/PM if you have suggestions.

Thanks,