Search found 105 matches
- Wed Apr 09, 2014 12:07 pm
- Forum: Late model JD crawler technical support
- Topic: streering clutch rebuild
- Replies: 3
- Views: 3688
Everything came apart fine. Im going to clean all the rust off and give everything a coat of rustoleum paint, some anti-seize on all the moving parts and gasket seal on the housing when i put the sides back on and hope this will do the job. I guess this time i will keep the dozer in the shed out of ...
- Thu Apr 03, 2014 7:14 pm
- Forum: Late model JD crawler technical support
- Topic: streering clutch rebuild
- Replies: 3
- Views: 3688
streering clutch rebuild
Im replacing my steering clutches on my 350. What kind of prep can i do to make everything work and last longer. Any help would be very helpful. Thanks.
- Wed Apr 02, 2014 5:16 pm
- Forum: Late model JD crawler technical support
- Topic: brake parts
- Replies: 1
- Views: 2077
- Wed Apr 02, 2014 10:14 am
- Forum: Late model JD crawler technical support
- Topic: brake parts
- Replies: 1
- Views: 2077
brake parts
I working on my 350 dozer and need the shaft that the throw out bearing is attached to. Deere is calling it a pin. The part # is t21316 its for the right side. Does anyone know i can find one.
Thanks john.
Thanks john.
- Mon Nov 25, 2013 8:07 pm
- Forum: Late model JD crawler technical support
- Topic: 350 clutches
- Replies: 2
- Views: 3236
350 clutches
How can you tell the good clutch kits from the bad ones.
- Tue Apr 16, 2013 6:38 am
- Forum: Late model JD crawler technical support
- Topic: blade controls
- Replies: 5
- Views: 5282
- Mon Apr 15, 2013 8:59 am
- Forum: Late model JD crawler technical support
- Topic: blade controls
- Replies: 5
- Views: 5282
blade controls
on my 350 i have the 6 way blade and have replaced the o-rings for the spools 3 times already and the same one keeps leaking. if im thinking right as the valve control is bolted in place its the one on the bottom next to the pressure valve .
- Thu Nov 17, 2011 9:37 pm
- Forum: Late model JD crawler technical support
- Topic: cbc injection pump
- Replies: 12
- Views: 9944
- Tue Nov 15, 2011 9:32 pm
- Forum: Late model JD crawler technical support
- Topic: cbc injection pump
- Replies: 12
- Views: 9944
- Tue Nov 15, 2011 7:56 pm
- Forum: Late model JD crawler technical support
- Topic: cbc injection pump
- Replies: 12
- Views: 9944
- Tue Nov 15, 2011 7:16 pm
- Forum: Late model JD crawler technical support
- Topic: cbc injection pump
- Replies: 12
- Views: 9944
- Tue Nov 15, 2011 6:21 pm
- Forum: Late model JD crawler technical support
- Topic: cbc injection pump
- Replies: 12
- Views: 9944
yes i read jdemaries's post on the subject. from the pics that i've found the pump has a stem pertruding out the side with a wire attached to it , is that part of the solenoid . from the pics on the jd website their are four coponates , nut , sleeve , spring, and a washer . i dont see a coil for a s...
- Tue Nov 15, 2011 5:17 pm
- Forum: Late model JD crawler technical support
- Topic: cbc injection pump
- Replies: 12
- Views: 9944
cbc injection pump
does the fuel shut off solenoid act as a relay to transfer power to the pump to allow fuel to pass.
- Thu Oct 20, 2011 5:45 pm
- Forum: Late model JD crawler technical support
- Topic: 66 350 problems
- Replies: 6
- Views: 5609
- Wed Oct 12, 2011 8:00 pm
- Forum: Late model JD crawler technical support
- Topic: blade controls
- Replies: 5
- Views: 5206