Search found 8 matches
- Fri Jun 07, 2013 2:13 pm
- Forum: Show & Tell
- Topic: My 440 IC can lift the moon.
- Replies: 0
- Views: 3533
- Tue Apr 27, 2010 9:12 pm
- Forum: Early model JD crawler technical support
- Topic: Welding Track Pins
- Replies: 2
- Views: 3777
Welding Track Pins
My newly owned 440 has at least one pin which is too loose in the links to stay in, I've just replaced it with new pin which is still too loose --- I can easily tap it in with a framing hammer and it began to come out twice during a 500 yard drive from where I was working on it. I searched the archi...
- Tue Mar 09, 2010 6:03 am
- Forum: Early model JD crawler technical support
- Topic: Henry backhoe
- Replies: 3
- Views: 5052
I have one of these and agree about the 1500-2000 lbs. Mine is currently being restored to working order, planning on mounting it to a custom made trailer so I won't have to pack it around directly on the back of the 440ic. I would enjoy seeing pictures of your backhoe, I would post some of mine but...
- Thu Jan 21, 2010 7:04 am
- Forum: Early model JD crawler technical support
- Topic: 430 hydrolic oil tank
- Replies: 11
- Views: 9836
I can't vouch for it on such a tank, but on large (ie 4") dented copper pipes you can pressurize it, then heat the pipe until its soft and the air pressure pushes the dent out for you neat as can be. I can imagine putting 5 or 10 lbs of air on a tank and using a torch till its starting to get plasti...
- Mon Jan 04, 2010 1:32 am
- Forum: Show & Tell
- Topic: My 440 IC
- Replies: 7
- Views: 8024
- Sun Dec 27, 2009 10:44 am
- Forum: Early model JD crawler technical support
- Topic: three point leftovers on 440?
- Replies: 3
- Views: 3988
- Sun Dec 27, 2009 10:43 am
- Forum: Early model JD crawler technical support
- Topic: three point leftovers on 440?
- Replies: 3
- Views: 3988
- Sun Dec 27, 2009 10:40 am
- Forum: Early model JD crawler technical support
- Topic: three point leftovers on 440?
- Replies: 3
- Views: 3988
three point leftovers on 440?
http://lh4.ggpht.com/_gFN1Cci-H34/SzeHbRkDdnI/AAAAAAAAACU/eCoJ8tIIYJ4/s144/DSC09181.JPG [/img] This looks like a place for mounting three point cylinder, and there is a rock shaft. I haven't been able to find pictures of one on a 440 with loader and the manual depictions don't show this area. It ha...