JDcrawlers Messageboard

I have some undercarriage parts from a 440 crawler loader that i am parting out, located in Belvidere, NJ call 908-797-3283 for your needs, most stuff is still there, no motor, and selling the rear end hopefully as one unit, already have a few people interested in that.

I am parting out some 1010 and 440 John Deere crawlers, one guy is looking for final drive gears for a 440, but are 1010 gears the same, the part numbers are different, The 440 lists M4207T or T11032T a 56 tooth gear, T17846T a 14 tooth gear, and T11031T, 13 tooth gear. The 1010 lists T23707T, or T1...

Following parts from John Deere 1010 crawler - fuel tank, hood, air cleaner, dash and side panels, muffler heat shield, track springs, steering clutch lever, transmission and crawler remnants - the trans and crawler remnants will be scrapped if not sold soon Also have John Deere 440 for parts, no en...

I recently saw at someone's place what might be a John Deere crawler top link bottom part but am not sure. Comparing the piece the to the picture in the parts catolog, it looks pretty close. Someone screwed a part of another top link into in tho. It was green in color and had the piece semi circle t...

Looking for top link for John Deere 430 crawler 3 point if anyone has one, you can reach me at 908-797-3283

Have remaining parts from John Deere 1010 crawler - includes one steering clutch, fuel tank, air cleaner, dash, dash front and side panels, track adjusting springs, have frame if someone wants trans with gears, if no interest will probably scrap that, all came from gas tractor. Call 908-797-3283, al...

Thanks for everyone's feedback and help with this.

Jason

I figured as much as i could not find any such information on that type of mounting in the parts book, it probably won't be too hard to modify though.

Will i have any mounting problems taking off the normal crawler seat and putting a deluxe seat on one with a 3 point hitch. Should i just take off frame under the original seat on put this on the deluxe seat. I have one deluxe seat with nothing under it and another one that came off a normal 1010 cr...

Thanks for the insight on parts interchanging. I guess i will keep those 1010 crawler parts that fit the 430. I think the front idlers will interchange too, you would just have to modify the shafts i believe.

What about the front idlers, what interchangeability is there to that?

I am looking for some inforamtion on parts interchangeability. I have a John Deere 1010 and 440 parts crawlers and am fixing up a John Deere 430. What parts from the 1010 and 440 will fit the 430 in track parts area? From my research, the track frames on 430 are different that the other two. The 440...