JDcrawlers Messageboard

Nathan, I had similar running on my 450c loader where it would quit after an minute or two. I disconnected the fuel line from the pump and the fuel was barely coming out. I drained the tank and blew compressed air back though the line and unclogged the sludge. Cleaned the tank as best as I could and...

Hi all. Finally found the time to replace the burnt out Fuel Shut Off Solenoid on my JD450c. I had to use a farm jack to lift the bucket so I could get to the injector pump. My plan was to remove the entire pump and take it to a local shop. The costs I was hearing was the deal breaker and I got up t...

Hey flathead. Hope things are going ok for you. I was wondering if you were able to get that pdf file working. Still haven't done anything with my 450. It's been raining so much that I'm not inclined to go outside and work on it yet. Thanks again for everyones help. I'll post with some pics when I g...

Thanks Flathead. I sent you an email. Matt

Hi Flathead. I appreciated your effort. I still haven't made any attempt to dismantle anything. Is there a way that you could copy and paste the pages that i would need into an email or if I sent you a CD disk, could you put the pdf file on it an return it to me? Thanks again. Matt

Hey Flathead. I sent you a private message. Not sure if you got it. My email is 250 mb so shouldn't be a problem. Here's my email. Thanks again. Matt

mtodd101@whidbey.com

Hey Flathead. You guys are getting closer, but still a ways to go. I'm in western Washington. 40 miles north of Seattle. Any documentation you could show me would be much appreciated. I've been going to the links you provided and seeing some good stuff. Thanks. I have seen jdemaris's pictures. I don...

Thanks again Ken. I was reading about messing up the timing and will be looking for someone local that maybe can help. Also will see about getting some manuals for this model loader. I'll drop back in and let you guys know if Lady Luck passes my way. Thanks , Matt

Hi again guys. Looking through some papers I have on the loader, I found the pump number. It is a Roosa master JDB435MD. Then I have a 2802. Not sure if that goes with the first number. One image to look at if you would. I did find an exploded view of a Roosa, but not my model so I'll stick to learn...

Thanks again Stan and others for your time on this. So as I see it, I need to remove the whole pump and take it to a shop to have it repaired. I was trying to find an exploded view of my pump to see the inner workings of it, but can't seem to fine any. I'll keep looking though. I have read about the...

Hi Ken. Thanks for your input also. Could you look at this image and tell me if I have things labeled right? Is the solenoid the block on top where the wire is connected. Do I have to remove the solenoid to get the spool out? And will it come off in one piece or is something going to drop out of it....

Thanks again for the replies, Matt and Stan. So is there any way you guys could point me in the direction of the fuel shut-off solenoid? I'm not totally new to this tractor, but don't go bragging about my diesel engine ability. I've put a new starter and fuel pump on and other minor repairs, but I d...

Thanks for the reply, Matt. So if I take that wire off, what can I expect. Any guesses. And would the short be a reason for the loader to die? The tractor was my father's and I don't know that much about fixing it. I searched for a broken wire behind the gauge with no luck. I wasn't able to get the ...

Hi everyone. Can someone tell me what this wire is for/to. It goes to a cluster plug behind the gauge panel. I was moving some dirt on Saturday and my machine sputtered and died. When i turn the key to start I'm getting smoke at the wire on the injector. At the same time the amp gauge bounces 90 deg...