JDcrawlers Messageboard

Wanted to ask and see if anyone has tried this. Need to rebuild the front idlers on the 430. Do the new rollers that are sealed for the 350 that can be purchased for around 100 have the correct shaft and bushings that could be used for what I need? I understand I would need to figure out the grease ...

Thanks I will give them a call

Anybody have a source for a transpo m5-216 voltage regulator? Been looking on the internet and I cant seem to find anything in the states or without having to purchase lots of them.

Will front idlers from a 440 fit a 430? If not what is the difference?

I think I have 1 complete and another one that might only be missing a couple things. Bought a couple parts machines over the years and these were on them. Don't really know any more about them than that.

Anybody got an idea what the reverser that fits on the nose of the transmission on a jd420 is worth?

For some reason I can't send messages or I don't think they are going through.

How are the tracks?

What are you asking for it?

Got any pics?

Anybody know what bearing JD8567T cross references too? I can't read the numbers on the bearing, and I was hoping I could find one cheaper than the $50+ deere wants. This is the bearing the steering clutch shaft rides on for lack of a better description.

Thanks for the info. I kind of thought it would probably work as it did at one time before I got this crawler. I have another parts crawler that should have the matching gears I need, if it does I will make them the same. I just didn't want to tear the side I just rebuilt back apart to change the ge...

Going through my 430c and one side the final drive has 16 tooth pinion and 63 tooth driven, and the other side has 14 tooth pinion and 55 tooth driven. The gear ratio is slightly different 3.9375 to 3.9286 would this cause an issue or am I worried about nothing? I just rebuilt the one side with the ...

Anyone ever change the mechanical style lift pump to an electric one? I seem to be having bad luck with the mechanical ones, the diaphragm keeps cracking and I fill the crank case with oil. Thinking about putting an electric one in its place. I assume I would just need a low pressure pump? Suggestio...

I am installing a new undercarriage on my 350b, I removed the track frames from the machine to make the rusty bolt removal easier with the rock guards and rollers. I am now installing the complete track frame with new rollers. My question is I understand the shims put in place on the rear crossmembe...

Working at rebuilding the undercarriage on a 350b crawler loader. I need new wear strips on both the track frames for the front idler and wear strips on the front idler itself. Anybody got dimensions for these parts? I just need to know length width and thickness of each, I can figure out the hole p...

Anybody have a good source for new front idlers for a JD 350b crawler loader? I haven't been able to find a set, I bought new tracks and rollers, but I didn't get idlers at the time, thought I could reuse the old, not the case. I haven't tried mother Deere yet, looking for something a little more af...

Sent you a PM with my email, let me know if you still have it