JDcrawlers Messageboard

Same experience as Leonard. I couldn't find my fill plugs on my 350B until I dropped the skid plate and brackets.

Leonard, You're absolutely right. It is the vertical shaft that does not rotate. Your thoughts on the problem with the tube that the throughout bearing slides on are where I think the problem may be as well. When I put the final drive back in place things where difficult to keep aligned. We probably...

This past summer I rebuilt the final drives and steering clutches on my 350B. Since putting it back together the left side the steering shaft will not rotate to slide the throughout bearing onto the pressure plate. Has anyone run into this problem? Any ideas? Thanks.

Ken,
I will check the engine oil level next time I fill the reservoir. How will this impact the engine?
Glenn,,,

Any suggestions on how to locate the problem with the power steering reservoir leaking? Shortly after filling the reservoir it completely drains everytime. No idea where it is going and alos wondering if is okay to operate with no fluid? Thanks!
Glenn,,,

How would I get in contact with ED? Are you interested in selling the ones you have? Thanks Gerald!
Glenn,,,,

Anyone know where I could buy an oil seal for final drive axle? Lavoy is out of stock. JD Part # AT36097

I'll send you an email for a quote and shipping info. Glenn,,,

Lavoy,
Do you carry the just the seal kit (Part # AT36097) for the final drive axle on the JD 350B crawler loader? If not, any suggestions on where I could find one? Thanks!

Glenn

Thanks guys. I have a heavy equipment shop lined up to do the work and we are trying to determine what is a reasonable time estimate. The shop is willing to charge based on actual time estimates experienced by others working on the 350. It sounds like we are talking a full day of shop time. They hav...

What is a reasonable time estimate to replace a steering clutch on a 350B? One side only. Thanks!

About the start tearing down my left steering clutch for replacement of the disks. Are there any posted videos or photographs of the procedure? Thanks!

Would .155 be the lower limit (worn out)? How thick is a new disk? Thanks!

I bought a 350B crawler loader last year and the steering clutch on the left side is bad. The previous owner gave me a few boxes of parts which includes two packages of fibre steering clutch disks (T20790). I have no idea if they are new or worn out. They look to be in good shape but wonder how you ...