JDcrawlers Messageboard

I've started working on my 440IC again. Just picked up 10 new aftermarket 350 rollers for it yesterday. The mounting holes are larger so I looked at the parts for a 350 here: https://partscatalog.deere.com/jdrc/sidebyside/equipment/62257/referrer/navigation/pgId/241898 It looks like they have a spac...

Looks like I posted something similar quite a while ago:

http://www.jdcrawlers.com/messageboard/ ... 802#p29802

This time I'm looking for parts...

Hi All, I've been searching the web for a while trying to find some good rollers. 4 on my crawler have had the sides broken off. I bought this around 7 years ago and it's been taking up space in my shop ever since. Progress stopped due to frustration and other projects. The rails had been replaced s...

I bought a 1959 440IC about a year ago. Equiped with: 1) Reverser 2) Big 5spd 3) Gearmatic 8A winch with remote lever but missing hydaulic lines. 4) 602 blade Initial assesment: 1) It has been used 2) Someone at one time put a little money into it 3) Engine clutch frozen 4) Steering clutches work bu...

I didn't notice any unusual dash holes. I finally got it pulled into the shop last weekend, got the blade off and now have it on jack stands. It seems guides on the left front roller are broken off though. I assume the well worn frame and wobbley front idler caused this but who knows. They are still...

So it seems I may have the wrong hood. The reservoir on mine is next to the reverser on the right side. Has the 602 blade. The extra hole does make it easier to get to the nuts to unbolt the front of the hood.

I just purchased a project 440. Do all the 440 hoods have 3 access doors? One for gas, one for radiator, the other front one for? The third isn't shown in my manuals, is this hood the correct hood for the 440IC?

Could be the float no longer floats. Sometimes they develope a leak. If it doesn't float the way it should it won't close the needle valve