JDcrawlers Messageboard

Thanks a lot sir appreciate the education

seams silly but its been a year since I started her up and asking what the shift pattern is on the machine - im specifically asking for the left to right gear positions - example from the left I have a forward position and a down - am I to understand forward position is- first gear and back - revers...

steve go ahead and please check on availability please and forward to me at kellytheaker@hotmail.com

I have been reading posts and have read i thought the solenoids for fuel on the cdc pumps are not available ? I am having a problem with mine and thought i would ask if anyone on here has a replacement for the pump . currently i hav a female connector that is not a great connection and it looks as i...

thanks for the education and appreciate the additional post

thanks recieved , is lavoy the supplier of the brake lining ?

could you forward the post author or the post itself , i did search it and could not locate thanks

just as you had stated that you had a set of sprocket shields and rock guards for a 350 . i also posted for a rear crossmember cap and bolts . these are the caps that capture and hold the rear crossmember to the brackets on the transmission .

do you still have the 350 stuff thanks

I need at least the 2 caps that capture the rear crossmember on a 350 rear crossbar the part number for the caps are #T13868 and the bolts 5/8" x 4- 3/4" The bracket would be nice as well but i can try andf retrieve the broken bolts. bracket part # is AT 35460 marked T30952 and the right side is AT3...

could use a good parts manual for a 350 loader . paper better for me but take a cd as well thanks

thanks very much , exactly as shown- the crossbar had 4 broken bolts surrounding it and no end caps to be found , i was hoping they might have been placed in the toolbox . thanks allowed me to understand what i was getting into . Picking it up

as i was getting out of the site it did open up and the supports are not compatible and the track frames although look similar do not match the numbers in the previous 350 parts diagram unless there are superseded numbers . please correct if wrong thanks

thanks TigerHaze i believe your on the money , i now understand the reasoning behind a good parts manual and not just the service manual . I will go and give this unit a better visual and make sure that this indeed is the area of discussion . and i thought i would ask is the frame for the track and ...

I have not got any pics but i believe tigerhaze is on the correct track . so they are bad for rear crossmember attatch points and i should look closer .these attatchment points are ? framerails or are they cast on the trans and really difficult or ? thoughts please , i have been looking for prior po...